Additional information
| Manufacturer | Maxtrax |
|---|
Back to Traction Devices
MAXTRAX MKII
Developed By 4WD Enthusiasts:
MAXTRAX was designed by experienced-4WD enthusiast and local Queensland guide book author Brad McCarthy with strength and ease-of-use in mind. It’s the safe, simple, quick, easy, effective and inexpensive method of vehicle recovery. MAXimum TRAXion on any terrain.
How It Works:
Wedge MAXTRAX firmly against your tire tread, shift into your lowest gear, and gently accelerate. Once your tire’s tread grips onto the MAXTRAX teeth, you will have the grip needed to self-recover. MAXTRAX work by adding traction and lifting your vehicle UP and OUT of the bog!
Related products
X-Bull Recovery Tracks
- Raised tracks help prevent vehicle tires from spinning on snow, sand, mud or ice
- No towing or pushing required
- UV Stabilized-- Resilient design
- Ideal for off-road use
- Prevent your vehicle's tires from spinning when stuck in snow, mud or sand
Rocks: 15 psi min.
Soft Sand: Deep / silt / soft sand 8 psi.
Beach sand: 10-12psi min.
Mud: 15psi depending on bottom (compensate for rocks/holes/branches)
Try and get the tracks up against the tires lowest surface so it can grab a cleat and pull underneath the vehicle. Once the tracks are under the tires, DO NOT increase RPM and spin tires, as this will burn the cleats off of the tracks . Maintain a steady throttle until you feel the truck rise up, then increase throttle until you are completely out of the obstacle and able to gain traction without aide. Available in a variety of colors! 
X-BULL New Recovery Traction Tracks Tire Ladder
DESCRIPTION
X-BULL traction boards provide unparalleled grip, durability, and can conquer any terrain. Providing you with extraordinary traction and maximum contact, achieving truly unparalleled grip. Our traction tracks feature an equally sturdy structure at the bottom, providing a rock-solid foundation in challenging conditions such as mud, sand, and snow, and can also be used for restoration purposes.
X-BULL traction boards are designed specifically for most tires and provides easy entry and start functions. These mats (3.1 inches when nested) take up less space. When sand marks are buried in the ground, the ratchet tie makes it easy to retrieve the traction boards. Easy to install. Bring more convenience to daily use.
Ideal for off-road use to help spinning tires get traction in the elements - Function in extreme weather as cold as -20°C (-4°F) and as hot as 60°C (140°F).
Manufactured from fiber-reinforced engineering grade nylon. Lightweight, Durable, High-impact Polypropylene plastic construction makes these built to last while being UV and Corrosion resistant - X-BULL offroad-boards can hold up to 12 tons. We bend 90 degrees, and won’t break
If you aren't 100% Satisfied for any Reason, We'll Refund Your Money.
MAXSA Escaper Buddy Traction Mat
Be ready for anything mother nature can throw at your vehicle with your new MAXSA Innovations Escaper Buddy heavy duty traction mats. Whether on paved roads or off-roading in your 4x4, these mats are designed with every nasty surface condition in mind. Whether it's snow or ice getting you stuck or driving through mud on the farm or fishing or surfing on the beach, we will get you unstuck. Simply place these mats as far under your vehicle's drive wheels as possible and the heavy duty construction and large surface area spreads the weight of your vehicle out. This will ensure you get out of the most dire of circumstances. Once the mats are in place, you only need to press lightly on your accelerator to get the vehicle moving again. The superior traction tread of the Escaper Buddy grabs onto your tires so they don't slip and thus prevents your vehicle from digging into whatever ground condition is affecting you. In case of a non-traction related emergency, the Escaper Buddy's high visibility day-glo orange color allows them to be used as an emergency signaling device to attract the attention of passing vehicles. Built for functionality, durability and storability, the low profile Escaper Buddy cleans up easily after each use and is designed to fit comfortably in most trunk spaces.
Never get stuck in the snow, sand or mud again!
The Escaper Buddy’s raised tracks give you the maximum traction to get out of any tough spot. Driving hazards like snow, ice, sand and mud are no match when you place these traction mats under the vehicle’s drive wheels. You get two: one for each front or rear wheel. Each huge traction mat is 49 x 14.5 inch. Press lightly on the accelerator and you’re going again. No towing and no pushing. Great for off-road.
Works with any vehicle! Store them in the trunk or on the roof of your vehicle and take them anywhere!
X-BULL Generation 3.0 Recovery Tracks
DESCRIPTION
Each traction mat is 41.7 inches long, 12.2 inches wide, and weighs 11.2 lbs together. Mounts easily to most available roof racks with optional mounting pins. A sturdy carry bag serves as an added benefit, bring more convenient for daily use. Lifetime service available. Raised tracks help prevent vehicle tires from spinning on snow, ice, mud, or sand - The ergonomic handles are designed for easy transporting. Cleats sink their teeth into tire tread and terrain under your 4WD vehicle to prevent it from slipping back into mud, snow, or sand and make vehicle recovery quick and easy The cross-shaped teeth, well positioned to bite the tires to prevent vehicle from slipping back, will not melt against drastic wheel spin, and contoured ramps are designed for an easier entering under the tire and drive up. The bottom of X-BULL recovery tracks adopts the same construction of the front to significantly increase friction and can also be used to get your vehicle unstuck. Ideal for off-road use to help spinning tires get traction in the elements - Function in extreme weather as cold as -20°C (-4°F) and as hot as 60°C (140°F). Manufactured from fiber-reinforced engineering grade nylon. Lightweight, Durable, High-impact Polypropylene plastic construction makes these built to last while being UV and Corrosion resistant - X-BULL offroad-boards can hold up to 10 tons. They bend 90 degrees, and won’t breakSPECIFICATIONS
- Size: 106cm x 31cm x 6cm - 41.7 x 12.2 x 2.4inches
- Material: Reinforced, UV Stabilized Nylon, 10-ton Capacity
- Weight: 5.1kg per pair of Tracks - 11.24 pounds
- Raised tracks help prevent vehicle tires from spinning
- No towing or pushing required
HOW TO USE
CLICK DETAILED INSTRUCTIONS: HOW TO USE RECOVERY TRACKS? When stuck, STOP! Don't keep spinning the tires- it won't work. Step 1: Use a shovel to get underneath the tires. Dig a track in front of ALL tires to make a roll-out path. The goal is to reduce resistance so you can keep your momentum. Step 2: Reduce tire pressure to a minimum amount you are comfortable with. X-Bull recommends carrying an air compressor, it's essential when off-road or in remote areas. Step 3: Position tracks against the tires so the tire will grab a cleat and pull the track underneath the tire. DO NOT SPIN THE TIRES, as this will burn the cleats off the tracks. Maintain a steady throttle until you feel the vehicle rise-up, then increase the throttle until you are free and able to gain traction. Suggested Tire Pressure*- Rocky terrain: 15 psi
- Soft Sand: Deep silt, soft sand - 8 psi
- Beach sand: 10-12psi
- Mud: 15psi depending on bottom (compensate for rocks/holes/branches)