MUYI 2 Set Standard Fuse Holder 14 Gauge Waterproof
Water-proof in-line Fuse Holder provided by MUYI Features excellent water-proof design with tight-fitting rubber cap, 14 AWG thick copper wire. Fit for standard blade fuse. 30cm/12inches pigtail wire allow you to cut and splice it into any project.
MUYI high quality fuse holder and correct fuse can protects a circuit from overloading in extreme operating conditions or in the event of a short circuit, keep your car and electric device in safe condition.
Specification:
Material:copper(coated with tin), rubber
Condition:100% New
Color:Black with red wire
Operating Temperature: 30?~170?
Fuse holder dimension:41x35x15mm
Wire Length:approx 30cm/12inches
Wire Range:14 AWG
Amp Range of Fuse Holder: 1 to 20A
Fuse Holder Voltage Max Operating:32V DC
For Fuse Series:Standard/Regular Blade Fuse(ATO)
Fuse included: Yes
Feature: Cover. Excellent water-proof design.
Each Set include 1x fuse holder and 1x 20A Standard blade fuse.
Package Included: (2 Set)
2 x Standard Blade Fuse Holders
2 x 20A Standard Blade Fuses
ATTENTION:
1?Fuse holders are designed with 14 AWG wire and they can support fuses rating 2A, 3A, 5A, 7.5A, 10A, 15A, 20A.
2?It is important to select the correct Amp rating before you install or replace fuses even though they come with commonly 2x 20A fuses.
3?Fuse holders are safe for use below Voltage Max Operating: 32V DC
Amazon’s Price:
Related products
10 AWG In-Line Blade ATC/ATO Waterproof Fuse Holder
- Heavy duty 10 gauge(AWG) In-line fuse holder Cable for ATC/ATO type fuses (Blade Large Size Fuse Holder).
- Waterproof design, rubber cap fits tightly to protect the fuse inside any standard blade. It's not easy to fall off or drain, so you can easily modify your car's electronics in a safe way. Don't worry about bursting or overloading that can damage your car's power train.
- Built-in fuse holder for standard blade fuses, suitable for 1A, 2A, 3A, 5A, 7.5A, 10A, 15A, 20A, 30A, 40A,50A,60A, ideal for car boat truck auto use,added protection to the circuit.
- Material:copper+rubber,fuse holder size: 3.1 x 2.4 x 0.6 inch.
- Package Included: 1 X 10AWG Blade Fuse Holder .Fuse not included.
Amazon's Price:
Blue Sea Systems 8-Circuit Fuse Holder
Blue Sea Systems ST Blade ATO/ATC Fuse Blocks
ST Blade ATO/ATC fuse blocks consolidate branch circuits and eliminate the tangle of in-line fuses for electronics and other appliances. Their robust design makes them ideal for marine and vehicle DC electrical systems. All buses and fuse clips are tin plated copper for corrosion resistance and optimal electrical conductivity. All ST Blade fuse blocks utilize a specialized fuse clip that is designed to hold fuses in place in the harshest conditions. All fasteners are stainless steel. Screws contain a captive star lock washer for a faster more secure installation. Studs utilize flange nuts for a simpler and safer installation. Fuses sold separately. Additional Key Features Include: Ground Bus: For DC negative connections. (5024, 5025, 5030, 5026, 5031, and 5032). Includes Cover: Easy to open insulating cover that provides access to fuses and satisfies ABYC/ USCG requirements. (5023, 5024, 5045, 5046, 5035, 5025, 5028, 5026, 5029 and 5032). Independent Source: Each circuit contains an individual feed wire. (5035 and 5037). Common Source: Single feed wire supplies power to all circuits in the fuse block. (5023, 5024, 5045, 5046, 5025, 5030, 5028, 5033, 5026, 5031, 5029, 5034, and 5032). Split Bus: Allows two isolated groups of 6 circuits each. (5032 only). Ignition Protection: Allows for use in a gasoline engine compartment. Meets ISO 8846 and SAE J1171 external ignition protection requirements. (5023, 5024, 5045, and 5046).Amazon's Price:
MUYI 2 Sets Inline Fuse Holder 10 Gauge Waterproof
- 10 AWG thick red pigtail wire allow you to splice it into any project.
- Wire length: 6 inches 10 gauge wire each side, Fuse holder dimension: 41x35x15mm
- Waterproof design, the rubber cap fits on tightly to protect any standard blade fuse inside. NOT easy to fall off or let water in.
- Inline Fuse Holder for standard blade fuses, Suitable for 1A,2A,3A,5A,7.5A,10A,15A,20A,30A,40A, ideal for car truck trailer atv boat marine
- Package Included: 2 X Standard Blade Fuse Holder and 2 X 40Amp Standard Blade Fuse
Amazon's Price:
