Back to Bull Bars & Light Bars
Westin 32-3985 Ford Ranger Textured Black Ultimate Bull Bar
The Ford Ranger Westin(TM) Ultimate Bull Bar is a front-end light bar made of 3-inch diameter tubing for larger model trucks and SUVs and made of 2.5 inch diameter tube for smaller trucks and SUVs. Product application is vehicle specific and comes complete with mounting kit. The Westin(TM)Ultimate Bull Bar features black molded caps on the crossbar welds for a finished and clean look. It features a stainless steel skid plate with a laser-cut Westin signature logo on it. Add a set of Westin(TM) Driving Lights for a complete customized look.
Related products
Tyger Auto TG-GD6F60478 Front Bumper Guard
Tyger Auto TG-GD6F60478 Front Bumper Guard Compatible with 2019-2023 Ford Ranger
US design patented TYGER Guard! The kit includes one bumper guard, all mounting hardware and the DIY installation manual. | FITMENT - Compatible with 2019-2023 Ford Ranger. Made of heavy-duty 2.5inch tubing frame with durable E-coating textured black finish for rust resistance and customized look! Seamless welding for a sturdy structure. Pre-welded light mount channel for optional LED lights (Lights excluded in the kit). Two pre-drilled mounting holes for license plate relocation if needed. Easy bolt-on installation. Tow hooks need to be removed if equipped. Minor cutting is required on models without tow hooks. May interfere with adaptive cruise control and front mounted sensors if equipped. BACKED BY TYGER - TYGER backs this product for 5-year for US customers against manufacturing defects! 
Fabtech 3-1/2″ Lift W/Dirt Logic Shocks Ford 2019-2023
This quality 2019 Ford Ranger Upper Control Arm system is perfect for owners looking to increase ride height to run slightly larger tires than factory. The system will provide additional wheel travel with no suspension bind at full droop.
Lift is accomplished with steel spacers that utilize the factory Coilover shocks for a stock like ride.
Fabtech’s Upper Control Arms address the geometry of the front suspension with the new ride height for proper align ability. Heavy duty ball joints allow for extended suspension travel to eliminate binding. The system has been designed for proper CV axle angle and plunge thus eliminating the need to reposition the front differential.
Included in this system is Fabtech’s Offset Intrusion Beam Kit that allows use of 33" tires. The factory Intrusion Beams are located in the front fenderwells, forward and back of the tire. They limit the size of the tire you can install while being an integral part of the front collision safety impact feature of the vehicle. Rather than modifying or removing the Beams for tire clearance, Fabtech provides replacement Offset Intrusion Beams. They are constructed of 1/4" thick steel and are a welded box design for maximum strength. They allow full steer with 33/1250R tires w/ a 5" back space wheel.
Rear lift comes from 1.5" blocks and u-bolts.
Features
- Value priced system with Fabtech quality
- Increased ground clearance for offroad
- Tubular UCA design with urethane bushings for quiet ride
- Extended range upper ball joints allow for increased travel
- Offset Intrusion Beams for full steer tire clearance
- Easy bolt on installation
2019-2023 Ford Ranger TAC Black Textured Bull Bar
TAC – One of The North America’s top online suppliers of specialized, high-quality aftermarket car and truck accessories. With over 20 years of auto accessory manufacturing experience. We are especially professional on Front Protection System, Side Step System and Roof Cargo Management.
TAC 3” Bull Bar are the most popular type of TAC front protection selection and fit for more than one hundred vehicle models of America’s trucks and SUV. We provide durable surface finish of Stainless steel polished, black powder and texture Black finish. Years of professional manufacturing experience, TAC 3” bull bar will give your car the best protection.
- FITS PERFECTLY - Fit 2019-2020 Ford Ranger (If you have any questions, please contact us to confirm fitment before ordering.)
- OUTSTANDING DESIGN - TAC bull bar creates a tough, heavy-duty appearance on the front end of your car while also providing protection and visibility.
- OE QUALITY MADE - The bull bar and brackets both made by heavy duty mild steel with E-coating & A+ grade Heavy Texture black powder coated finish for rust-resistant and anti-scratch.
- EASY TO INSTALL - Direct bolt-on (Vehicles without tow hooks should cut openings for the brackets), all mounting hardware and Installation instruction included. Professional installation is always highly recommended.
- NO-HASSLE WARRANTY - OE quality standard. 5-year warranty against manufacturing defects!
Nilight Universal License Plate / LED Light / Mounting Bracket
Nilight heavy-duty front bumper license plate mount bracket color: black, material: high-quality aluminum alloy great performance, sturdy and durable. Features multiple fixing points, installs behind number plate, easy installation suitable for most vehicles. Fit most cars, trucks, Pickups, SUV, Jeep, 4X4 with front license plate holes. Allow to add more auxiliary lights to front bumper without excess drilling/modification. Extra lighting and cool looking for your vehicle. Compatible with most lights/lamps with bottom mounting screws, some small size side mounted lights can be mounted by using extra bumper brackets.
NOTE: Light not included.