Back to 2019-2023 Ranger Winch Bumpers
Vijay 2019 Ford Ranger Winch Bumper
About This Item
[Compatibility]: 2019-2020-2021-2022-2023 Ford Ranger.
[Heavy Duty Construction]: The bumper body is made of heavy-duty, high-strength 7/64-inch steel, and the winch plate and mounting brackets are made of 3/16-inch steel. The front bumper weighs approximately 122 lbs.
[Practical Design]: The bumper is equipped with a built-in winch plate that can withstand a winch up to 12,000 pounds.
[Comprehensive Protection]: The bumper is a one-piece structure that perfectly fits the body lines. Rugged off-road styling enhances the vehicle’s overall aesthetic, giving it a tough and aggressive look.
[Durable Coating]: Textured black powder coating and internal premium electronic coating process for long-lasting durability and corrosion resistance.
[Easy to Install]: No cutting, drilling or modification required. Replace your original stock bumper with a factory mounting point direct bolt-on upgrade. Comes with mounting hardware kit and installation instructions.
[Product Note]: The bumper does not include the wiring harness connected to the car lights. The bumper sensor hole does not support the original sensor. Sensor needs to be purchased separately
Related products
2019-2020 Ford Ranger Warn 103379 Trans4mer Full Grille Guard
The WARN 103379 Bolt-On Full Grille Guard is winch compatible, commercial-grade, and designed for the 2019-2020 Ford Ranger. It provides heavy-duty protection for the vehicle’s bumper, grille, fascia, and winch mounting system. Features a flat side member design with a stylized and replaceable rubber trim, includes 2" tubular cross members (one with welded tabs to mount lights), and includes durable, welded headlight guards. The innovative design reduces the install time due to no cutting, drilling, or grinding required during installation. The WARN 103379 Bolt-On Full Grille Guard requires WARN PN 103322 mount system and is designed, tested, and made in the USA. Note: this will restrict the use of adaptive cruiser control and front parking sensors.
- Bolt-on full grille guard for 2019-2020 Ford Ranger; Provides protection for the vehicle’s bumper, grille, fascia, and winch mounting system
- Features flat side member design with a stylized and replaceable rubber trim
- Includes 2" tubular cross members, one with welded tabs to mount lights, and durable, welded headlight guards
- No cutting, drilling, or grinding is required for installation allowing for reduced install time
- Requires WARN PN 103322 mount system; Designed, tested, and made in the USA
2019-2020 Ford Ranger Warn 103322 Trans4mer Mid-Frame Mounting Kit
The WARN 103322 Base Winch Mount System is commercial-grade and designed for the 2019-2020 Ford Ranger and includes the mounting bracket as well as a mid-frame winch carrier. Pull-tested and certified to withstand 12, 000 lbs. of pulling force, allowing this winch mount to be compatible with foot-down mounted winches up to 12, 000 lbs. in pulling capacity. The innovative design reduces the install time due to no cutting, drilling, or grinding required during installation. Includes provisions to mount lights and J-Hooks for recovery, and is designed, tested, and made in the USA. Fits WARN winches such as Zeon, Zeon Platinum, VR, M8, XD9, and 9. 5xp. Note: this will restrict the use of adaptive cruiser control and front parking sensors.
- Base winch mount system for 2019-2020 Ford Ranger; Includes mounting bracket and mid-frame winch carrier
- Pull-tested and certified to withstand 12, 000 lbs. of pulling force
- Compatible with foot-down mounted winches up to 12, 000 lbs. in pulling capacity; Fits WARN winches such as Zeon, Zeon Platinum, VR, M8, XD9, and 9. 5xp
- No cutting, drilling, or grinding is required for installation allowing for reduced install time
- Includes provisions to mount lights and J-Hooks for recovery; Designed, tested, and made in the USA
2019-2020 Ford Ranger Stealth Fighter Winch Bumper W/ Sensor Cutouts
Give your Ford Ranger an upgrade with the Stealth Fighter steel plate winch bumper. A modern radius plate design allows the Stealth Fighter bumper to keep a tight fit to the front of the truck, while also providing your Ford Ranger with additional front-end protection.
Each Stealth Fighter bumper comes equipped with our patented universal light mount system in the center of the bumper. Mount up to 10 cube lights or a 40" radius light bar. Mix and match any brand and size light to give your Ford Ranger the optimal lighting setup that you need on your off-road adventures. Additional lighting behind the side panels can mount a single cube light per side.
Reinforced clevis mounts are designed to accept 3/4" D-Rings for extra added utility.
FEATURES
- Winch mount
- Sensor cutouts
- Modern radius plate design
- Universal light mount / Up to 10 cube lights or a 40" radius light bar
- Mounts for cube lights behind side panels
- 100% direct bolt-on
- Reinforced clevis mounts
- Made in America
VEROMCA 2019-2023 Ford Ranger Winch Bumper
Product Description:
VEROMCA Black Texture Steel Front Bumper with Winch Plate & Lights Fit 1998-2011 Ford Ranger. Manufacturer Direct Sell | Awesome customer's service GUARANTEED Package included?- Front Bumper
- 1X144W Light Bar Bracket
- 2X24W Square Lights
- 2X24W Strip Lights
- 2X4.75-ton D-Rings
- 2XWashers
- Mounting Hardware
- Installation instructions
Product Advantage?
1.The material is made of 5/32" thick low carbon hard steel and 2" x 0.120" precision tolerance steel tube, stiffer, more durable bumpers, advanced level 3 black powder coating, corrosion resistant and durable. 2.Our bumpers are engineered to be a direct bolt-on upgrade using just basic hand tools, so there is no drilling or cutting required. Straight forward installation.