Additional information
| Manufacturer | Torch |
|---|
Back to 1998-2011 Ford Ranger Lift Kits
Torch 3-Inch Lift Kit With Add-A-Leafs For 1998-2011 Ford Ranger
TORCH 3″ Front 1.5″-2″ Rear Lift Kit
- Enhance the look of your vehicle and run larger tires with TORCH Off Road’s Lift Kit
- TORCH Off Road Add a Leaf rear lift kit will give you 1.5″-2″ of lift and an increased maximum load capacity.
- Our Add-A-Leaf Springs are designed to be added to your existing leaf spring packs and also enhances vehicle spring rate and reliability when towing.
- This rear lift kit does not include extended U-Bolts. You will need your factory U-Bolts to have at have least 1/2″ of thread past the nut to install our leafs. If you have less than 1/2″ of thread, we have extended U-Bolts of various sizes available. Please message us directly if you have any questions!
Kit Includes:
- 1″-3″ Adjustable Torsion Keys
- TORCH “Add-A-Leaf” Spring (for 1.5″-2″ of lift)
- Extended Alignment Pins and Hardware
- Isolator Pads
Benefits:
- Easy 2-4 hour Installation Process***
- Enhance Vehicle Spring Rate, Maximize Load & Towing Capacity
- Minimize Squat Or Sag Under Heavy Load
- Increase Ground Clearance And Install Larger Custom Rims & Tires
- Poly Isolator Pads For Quiet & Smooth Ride
Technical Notes:
- Front Lift: 1″-3″ Adjustable
- Rear Lift: 1.5″-2″
- Leaf springs are 2/5″ thick (message us if you have any questions)
- Leaf Spring Dimensions: 60mm wide x 10mm tall x 540mm long
- An alignment is always recommended after altering the height of your vehicle.***
Related products
Torsion Bar Adjustment Tool for Ford – OTC 7816
OTC Torsion Bar Adjustment Tool for Ford Before servicing a torsion bar on 1998-2011 Ford Ranger vehicles you must first contain the bar to avoid possible damage. This tool securely accomplishes that task allowing you to make adjustments. It is similar to Ford No. 204-185 (T95T-5310-AR).
Superlift 4-inch Lift Kit For 1998-2011 Ford Ranger
Details
This is Superlift's complete knuckle style suspension lift kit for the 1998-1999, or 2000-2010 Ford Ranger 4wd; providing 4" of lift height.Features
- New nodular iron knuckles, not ball joint spacers
- Load bearing bracketry made of .25" thick plate steel or heavy-wall tubing
- Full-width differential/control arm crossmembers provide lateral rigidity
- Rear lift achieved via blocks
- Front / rear Superide shocks included
- Heavy-duty replacement front driveshaft available
- The lift kit retains factory ride quality, steering geometry, and CV axle angles. All load-bearing bracketry is laser-cut from .25" steel plate.
- This replacement steering knuckle lift includes lower control arm crossmembers, plus bracketry to lower the torsion bar crossmember.
- A 3" block kit provides rear lift. The lift kit includes front and rear Superlift shocks.
Install Time
- 9 hours
- Difficulty level: 3 of 5
Notes
- When lifted, the stock front driveshaft's life span is considerably reduced; expect a life of 25k to 30k miles. The Superlift replacement shaft is a more "lift friendly" dual cardan design.
- Some models may require the purchase of aftermarket alignment cams, as some vehicles were not equipped from the factory with cam bolts.
- FX4 models require optional Rear U-bolt Kit part #10914.
What's Included
- All brackets
- Shocks
- Steering knuckles
- Crossmembers
- Rear block
- U-bolt kit
- Hardware
- Detailed instruction manual walking you step-by-step through the lift kit installation procedures suitable for do-it-yourselfers (DIY) or professional installation.
Torch 3-Inch Lift Kit With Shackles For 1998-2011 Ford Ranger
TORCH 3" Front 2" Rear Lift Kit
Enhance the look of your vehicle and run larger tires with TORCH Off Road's Lift Kit- TORCH Off Road torsion keys are built nearly twice as strong as your factory keys to ensure that they hold up to any road you're driving on.
- They're engineered with just the right indexing so that you can adjust up to 3" of lift from the factory ride height without compromising ride quality.
- Shackle hardware is a recommended replacement due to it being compromised during removal, unlike other shackles on the market, our kit includes new hardware to replace your factory hardware.
Kit Includes:
- 1"-3" Adjustable Torsion Keys
- 1"-2" Adjustable Shackles
- Comes with instructions and everything shown in the picture.
Benefits:
- Easy 2-4 hour Installation Process***
- Increase Ground Clearance And Install Larger Custom Rims & Tires
Technical Notes:
- Front Lift: 1"-3" Adjustable
- Rear Lift: 1"-2" Adjustable
- An alignment is always recommended after altering the height of your vehicle.***
Tuff Country 1.5-Inch Leveling Lift Kit – 22907
Tuff Country's Leveling Kits level the front of your truck or SUV with the rear, allowing for slightly larger tires and eliminating the nose-down, factory rake. Tuff Country EZ-Ride Suspension was one of the original manufacturers of suspension leveling kits for trucks and SUV's and all Tuff Country Leveling kits are made of the highest quality materials. Engineered to maintain a factory or near-factory ride quality on all vehicles.
Technical Details:
- Torsion Key Leveling Kit
- 1.5 inch Lift Torsion Bar Keys
- Max Tire Size: 33 inches