Additional information
| Manufacturer | Superlift |
|---|
Back to 2019-2020 Ford Ranger Lift Kits
Superlift 2-Inch Leveling Kit For 2019-2020 Ford Ranger
Take your Ford Ranger to a new height with an improved attitude and aggressive look with the Superlift LEVEL-IT 2-inch leveling Kit. SUPERLIFT’s Level-IT lift system is a perfect solution for anyone wanting an economical and easy way to level front to rear on the all-new 2019-2020 Ford Ranger Truck.
Whether it is simply leveling the truck’s stance or providing increased ground clearance for a more aggressive tire and wheel combination, these Level-It components work with factory suspension components to achieve modest ride height gains without breaking the bank.
Made of strong and durable high construction steel and powder coated, this Level-It kit is a super-simple 100% bolt-on installation and backed by a Limited Lifetime Warranty.
Features:
- Front Strut Spacer Leveling Kit
- Retains Factory Ride Quality
- Levels the Front end of the vehicle
- Adds clearance for 32” tires
- Backed by our Limited Lifetime Warranty
- 100% super-simple bolt-on installation
- Made in the USA
Benefits:
- Designed using existing suspension
- Maintain Factory Ride
- Increased Ground Clearance
- No Need to disassemble your struts to install
- Does not require a strut compressor
- Retains OEM caster and camber alignment specifications
- Works with all OEM Model Control Arms
- Corrosion Resistant
- Ideal for restoring lost height due to heavy front bumpers, winch/bumper combo, or snow plows
Technical Notes:
- Does not fit on 2WD version
- Aftermarket Wheels do require a minimum of 93.1mm center bore and max. backspacing of 6.5 inches.
- Aftermarket wheels with less backspacing than recommended may require some trimming
- 9 inch wide aftermarket wheels will require trimming
Related products
BDS 2.5-Inch Lift Kit For 2019-2023 Ford Ranger
Overview
Properly level the front of your 2019-2023 Ford Ranger truck by installing this 2.5-inch leveling kit from BDS. Specially designed for the new Ranger, this 2.5" leveling kit is engineered for additional tire clearance and improved performance without overextending the suspension or driveline angles at full suspension droop. To prevent maxing out ball joints or CV damage, BDS gets around this issue by using a 2-piece design with a smaller top mounted steel strut spacer in combination with a preload spacer. To further ensure proper drivetrain geometry the front differential is repositioned using relocation brackets. These brackets correct CV axle angle while allowing the use of the factory front skid plates. The lift kit includes steel top mount strut spacers, pre-load spacers, differential relocation brackets and custom-tuned NX2 Nitro or FOX Performance series shocks. Give your new Ranger the extra boost with this 2.5" leveling kit from BDS Suspension.Features & Benefits
- Easy, 100% Bolt-on installation
- Maintains factory like ride quality
- Standard NX2 Nitro shocks with vehicle-specific valving for better control
- Upgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road
Recommended Tires & Wheels
(Trimming may be required)- 285 / 70 with 17 x 8 and in. Backspace
- 285 / 65 with 18 x 9 and in. Backspace
Rear Shock Option
NX2 Nitro Series- Nitrogen-charged
- Twin-tube design
- 10-stage velocity-sensitive valving
- Dual-welded ends for increased strength
- 1-3/8-inch high-flow piston
- Self-lubricating seals
- Silver powder coat finish
- 2-inch Impact extruded aluminum body
- Internal floating piston (IFP) monotube design
- CNC machined 6061-T6 aluminum mounting ends
- Massive 5/8-inch hard chrome plated heat-treated alloy steel shaft
- Race-developed high-flow piston design
- Application-specific valving to maximize performance
- Long-lasting clear anodized finish
Icon Coilover Kit For 2019-2023 Ford Ranger
ICON’s Vehicle-specific shock length and valving along with the larger 2.5” shock body and increased piston area over stock components yield the maximum travel possible along with superior ride quality and suspension performance both on- and off-road. Reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. ICON's exclusive Compression Damping Control Valves are included for precisely dialing in your suspension performance. CDCV controls fluid flow under compression, allowing you to achieve the perfect tune whether driving on the street, slow-crawling through the rocks or mobbing across the desert at full throttle.
- Adjustable coilovers yield 0-3.5 of front lift height.
- Vehicle specific valving provides unrivaled ride quality across a wide range of on and off-road use.
- Extended travel length requires ICON upper control arms but offers more wheel travel and improved performance.
- Superior low speed control reduces body roll and increases on-road stability.
- High quality ICON-engineered coil springs are guaranteed for life against sagging or breakage.
Superlift 3-Inch Lift Kit For 2019-2023 Ford Ranger
Features
- Complete front and rear lift kit
- Vehicle specific fitment
- Includes all required installation hardware
- Most kits are available with Superlift or Bilstein shocks
- Backed by a limited lifetime warranty
- Made in the USA - West Monroe, LA
Description
Upgrade your suspension with an American made Superlift 3" lift kit. Superlift 3" lift kits come as a complete replacement suspension lift. This kit includes all front and rear lift components and hardware required for a smooth ride. Most kits come with coil springs and shocks. order your Superlift lift kit with Superlift shocks or upgrade to Bilstein 5100 series shocks. Add larger wheels and tires and accomplish an aggressive stance with a Superlift 3" lift kit. This kit comes with step by step instructions and vehicle specific hardware to ensure a precision fit. Superlift stands by their product and backs there lift kits with a limited lifetime warranty. Superlift lift kits. Take the road less traveled with a Superlift lift kit| Tire | Wheel | Backspacing | Offset |
|---|---|---|---|
| 285/70R17 | 17x9 | - | Stock |
| 285/65R18 | 18x9 | - | Stock |
| 285/55R20 | 20x9 | - | +30MM |
Fabtech 3-1/2″ Lift W/Dirt Logic Shocks Ford 2019-2023
This quality 2019 Ford Ranger Upper Control Arm system is perfect for owners looking to increase ride height to run slightly larger tires than factory. The system will provide additional wheel travel with no suspension bind at full droop.
Lift is accomplished with steel spacers that utilize the factory Coilover shocks for a stock like ride.
Fabtech’s Upper Control Arms address the geometry of the front suspension with the new ride height for proper align ability. Heavy duty ball joints allow for extended suspension travel to eliminate binding. The system has been designed for proper CV axle angle and plunge thus eliminating the need to reposition the front differential.
Included in this system is Fabtech’s Offset Intrusion Beam Kit that allows use of 33" tires. The factory Intrusion Beams are located in the front fenderwells, forward and back of the tire. They limit the size of the tire you can install while being an integral part of the front collision safety impact feature of the vehicle. Rather than modifying or removing the Beams for tire clearance, Fabtech provides replacement Offset Intrusion Beams. They are constructed of 1/4" thick steel and are a welded box design for maximum strength. They allow full steer with 33/1250R tires w/ a 5" back space wheel.
Rear lift comes from 1.5" blocks and u-bolts.
Features
- Value priced system with Fabtech quality
- Increased ground clearance for offroad
- Tubular UCA design with urethane bushings for quiet ride
- Extended range upper ball joints allow for increased travel
- Offset Intrusion Beams for full steer tire clearance
- Easy bolt on installation