Additional information
| Weight | 15.5 lbs |
|---|---|
| Manufacturer | Performance Accessories |
Back to Ford Ranger Body Lifts
1989-1992 Ford Ranger 3-Inch Body LIft
Performance Accessories 3-inch Body Lift Kit PN-833 raises the vehicle for adding larger diameter tires, without altering the factory suspension system and OE ride characteristics. The kit includes high pressure fiberglass reinforced nylon lift blocks, 3/16 inch thick laser cut and powder coated relocation brackets, a CNC machined and zinc plated steering extension, high strength hardware, and extension brackets. Manual transmission requires (Shift Extension PN-3700). A set of urethane wheel-well extensions (Gap-Guards 2wd & 4wd PN-6727) are available separately, and are used to conceal any gaps between the body and frame in the wheel wells. For the rear bumper area a one piece rear bumper urethane Gap-Guard is available separately (Rear Bumper Gap-Guard PN-6738) and is used to conceal the gap between the tailgate and the rear bumper. This system can be installed in 6 to 7 hours and comes complete with everything necessary for installation.
Benefits:
- Provides 3-inches of lift without modifying existing suspension components.
- Allows use of larger diameter tires and factory rims for improved ground clearance.
- DOES NOT alter the OEM suspension geometry or factory stability control parameters.
- Maintains the factory smooth ride.
- Keeps the truck’s center of gravity lower than a comparable suspension lift.
Features:
- Fiberglass reinforced nylon body blocks
- CNC machined & zinc plated steering extension
- Laser cut and zinc plated fittings and brackets
- High strength hardware included
- Made in the U.S.A.
Notes:
- It may be necessary to drill the front two body bushing sleeves out to 1/2″ for new bolt clearance.
- Steering extension included.
- Manual transmission models will require Part# 3700 shift extension (Mazda transmission only).
- Gap guards available and sold separately for this application.
- No bumper brackets are included in this kit.
Amazon’s Price:
Related products
1995-1997 Ford Ranger 3-Inch Body Lift
Performance Accessories 3-inch Body Lift Kit PN-853 raises the vehicle for adding larger diameter tires, without altering the factory suspension system and OE ride characteristics. The kit includes high pressure fiberglass reinforced nylon lift blocks, 3/16 inch thick laser cut and powder coated front and rear bumper relocation brackets, a CNC machined and zinc plated steering extension, high strength hardware, and extension brackets. Manual transmission requires (Shift Extension PN-3700). A set of urethane wheel-well extensions (Gap-Guards 96-97 2WD Ranger B-Series PN-6727) or (Gap-Guard 95-97 2WD & 4WD Splash PN-6733) or (Gap-Guards 1995 4WD Models PN-6727) and (Gap-Guard 96-97 4WD Models PN-6732) are available separately, and are used to conceal any gaps between the body and frame. This system can be installed in 7 to 8 hours and comes complete with everything necessary for installation.
Benefits:
- Provides 3-inches of lift without modifying existing suspension components.
- Allows use of larger diameter tires and factory rims for improved ground clearance.
- DOES NOT alter the OEM suspension geometry or factory stability control parameters.
- Maintains the factory smooth ride.
- Keeps the truck's center of gravity lower than a comparable suspension lift.
- Fiberglass reinforced nylon body blocks
- CNC machined & zinc plated steering extension
- Laser cut and powder coated front and rear bumper relocation brackets
- Laser cut and zinc plated fittings and brackets
- High strength hardware included
- Made in the U.S.A.
- It may be necessary to drill the front two body bushing sleeves out to 1/2? for new bolt clearance.
- Front and rear bumper brackets are included in this kit.
- Modification to the front frame horns will be required to raise the front bumper using the bumper brackets included.
- Steering extension included.
- Manual transmission models will require Part# 3700 shift extension (Mazda transmission only).
- Rear bumper brackets are to enhance appearance only, bumper cannot be used for towing.
- Gap guards available and sold separately for this application.
1983-1988 Ford Ranger 3-Inch Body Lift
Performance Accessories 3-inch Body Lift Kit PN-PA813 raises the vehicle for adding larger diameter tires, without altering the factory suspension system and OE ride characteristics. The kit includes high pressure fiberglass reinforced nylon lift blocks, 3/16 inch thick laser cut and powder coated front bumper relocation brackets, a CNC machined and zinc plated steering extension, high strength hardware, and extension brackets. Manual transmission requires (Shift Extension PN-PA3700). A set of urethane wheel-well extensions (Gap-Guards 2wd & 4wd PN-PA6727) are available separately, and are used to conceal any gaps between the body and frame. For the rear bumper area a one piece rear bumper urethane Gap-Guard is available separately (Rear Bumper Gap-Guard PN-PA6738) and is used to conceal the gap between the tailgate and the rear bumper. This system can be installed in 6 to 7 hours and comes complete with everything necessary for installation.
Benefits:
- Provides 3-inches of lift without modifying existing suspension components.
- Allows use of larger diameter tires and factory rims for improved ground clearance.
- DOES NOT alter the OEM suspension geometry or factory stability control parameters.
- Maintains the factory smooth ride.
- Keeps the truck's center of gravity lower than a comparable suspension lift.
- Fiberglass reinforced nylon body blocks
- CNC machined & zinc plated steering extension
- Laser cut and powder coated front bumper relocation brackets
- Laser cut and zinc plated fittings and brackets
- High strength hardware included
- Made in the U.S.A.
- It may be necessary to drill the front two body bushing sleeves out to 1/2? for new bolt clearance.
- Steering extension included.
- Manual transmission models will require Part# 3700 shift extension (Mazda transmission only).
- Gap guards available and sold separately for this application.
- No bumper brackets are included in this kit.
Ford Ranger Gear Shift Extension
Performance Accessories designed and manufactures a one piece CNC machined steel shift extension for Mazda manual transmission. Designed for easy installation and comes complete with all the necessary hardware. 95-02 Ford Ranger, Bronco II, Explorer w/Mazda Transmission Additional Information: High quality CNC machined steel and zinc plated manual transmission extension Complete with all the necessary hardware and instructions Made in the USA.
Technical Details:
- For Manual Transmission
- Zinc Plated for extended life
- Complete with all the necessary hardware and instructions
- Designed for easy installation
- Proudly Made in the USA
1998-2000 Ford Ranger 3-Inch Body Lift
Performance Accessories 3-inch Body Lift Kit PN-883 raises the vehicle for adding larger diameter tires, without altering the factory suspension system and OE ride characteristics. The kit includes high pressure fiberglass reinforced nylon lift blocks, 3/16 inch thick laser cut and powder coated front and rear bumper relocation brackets, a CNC machined and zinc plated steering extension, high strength hardware, and extension brackets. Manual Transmission vehicles will need part number (Shift Extension PN-3700). A set of urethane wheel-well extensions (Gap-Guards 2WD Ranger/Edge PN-6737) or (Gap-Guard 2WD Splash PN-6733) or (Gap-Guards All 4WD Models PN-6732) are available separately, and are used to conceal any gaps between the body and frame. This system can be installed in 7 to 8 hours and comes complete with everything necessary for installation.
Benefits:
• Provides 3” additional lift without modifying existing suspension system.
• Allows up to 32” tires and use of factory rims for improved ground clearance. (33” with bumper valance trimmed or torsion bar crank).
• DOES NOT alter the OEM suspension geometry.
• Maintains the superior Factory ride.
• Keeps center of gravity lower than comparable Suspension lift.
Features:
- Fiberglass reinforced nylon body blocks
- CNC machined & zinc plated steering extension
- Laser cut and powder coated front and rear bumper relocation brackets
- Laser cut and zinc plated fittings and brackets
- High strength hardware included
- Made in the U.S.A.
- It may be necessary to drill the front two body bushing sleeves out to 1/2" for new bolt clearance.
- Front and rear bumper brackets are included in this kit.
- Modification to the front frame horns will be required to raise the front bumper using the bumper brackets included.
- Steering extension included.
- Manual transmission models will require Part# 3700 shift extension (Mazda transmission only).
- Rear bumper brackets are to enhance appearance only, bumper cannot be used for towing.
- Gap guards available and sold separately for this application.