Additional information
| Weight | 4 lbs |
|---|---|
| Manufacturer | Warn |
Back to Dana 44 Manual Hubs
Warn 9790 Manual Hubs For Dana 44
Notes:
Vehicles with full time 4 wheel drive will require a transfer case conversion kit.
When replacing automatic 3 hole cap screw hubs, you must purchase corresponding spindle nut conversion kit.
Will Not Fit 1987-Early 1988 Ford Bronco & F-150 Models Vehicles, Flange Mount
For 19 spline axles.
Sold as a pair.
Vehicle Applications:
Chevrolet/ GMC:
- 1969-1991 Blazer, Jimmy, Suburban (Spindle nut #32720)
- 1969-1987 1/2 Ton (Spindle nut #32720)
- 1977-1987 3/4 Ton (Spindle nut #32720)
Dodge:
- 1969-1974 1/2 Ton & Ramcharger
- 1980-1993 1/2, 3/4 Ton, & Ramcharger
Ford:
- 1966-1996 Bronco (Spindle nut #32720)
- 1959-1996 1/2 Ton (Spindle nut #32720)
- 1959-1975 3/4 Ton
- 1977.5-1997 3/4 Ton Light Duty (Spindle nut #32720)
International Harvester:
- 1/2 Ton, Travelall
Jeep:
- 1974-1991 J-10 Pickup, Commander
- 1977-1987 J-20 Pickup
Instructions
Click HERE
Amazon’s Price:
Related products
Warn 11967 Service Kit For Dana 44 Standard Hub
This kit is for Warn 9790 Dana 44 Standard Hubs ONLY.
The Warn 20990 Premium Hubs fit the:
- 1966-1996 Ford Bronco
- 1959-1996 Ford 1/2 Ton Pickup (F-100 / F-150)
Warn 29071 Manual Hubs For Dana 35 TTB
Details:
Warn P/N 29071 For Dana 35 TTB
Fits:
- 1990-1997 Ford Ranger
- 1990-1994 Ford Explorer
Warn 20825 Service Kit For Dana 44 Premium Hub
This kit is for Warn 20990 Dana 44 Premium Hubs ONLY.
The Warn 20990 Premium Hubs fit the:
- 1966-1996 Ford Bronco
- 1959-1996 Ford 1/2 Ton Pickup (F-100 / F-150)
- 12 Allen head cap screws
- 2 small axle shaft retaining rings
- 2 large axle tube retaining rings
- 2 large cap O-rings
2019-2020 Ford Ranger Warn 103322 Trans4mer Mid-Frame Mounting Kit
The WARN 103322 Base Winch Mount System is commercial-grade and designed for the 2019-2020 Ford Ranger and includes the mounting bracket as well as a mid-frame winch carrier. Pull-tested and certified to withstand 12, 000 lbs. of pulling force, allowing this winch mount to be compatible with foot-down mounted winches up to 12, 000 lbs. in pulling capacity. The innovative design reduces the install time due to no cutting, drilling, or grinding required during installation. Includes provisions to mount lights and J-Hooks for recovery, and is designed, tested, and made in the USA. Fits WARN winches such as Zeon, Zeon Platinum, VR, M8, XD9, and 9. 5xp. Note: this will restrict the use of adaptive cruiser control and front parking sensors.
- Base winch mount system for 2019-2020 Ford Ranger; Includes mounting bracket and mid-frame winch carrier
- Pull-tested and certified to withstand 12, 000 lbs. of pulling force
- Compatible with foot-down mounted winches up to 12, 000 lbs. in pulling capacity; Fits WARN winches such as Zeon, Zeon Platinum, VR, M8, XD9, and 9. 5xp
- No cutting, drilling, or grinding is required for installation allowing for reduced install time
- Includes provisions to mount lights and J-Hooks for recovery; Designed, tested, and made in the USA