Back to Ford Ranger Body Lifts
1993-1994_ford_ranger_body_lift_813

1993-1994 Ford Ranger 3-Inch Body Lift

Performance Accessories 3-inch Body Lift Kit PN-PA813 raises the vehicle for adding larger diameter tires, without altering the factory suspension system and OE ride characteristics. The kit includes high pressure fiberglass reinforced nylon lift blocks, 3/16 inch thick laser cut and powder coated front bumper relocation brackets, a CNC machined and zinc plated steering extension, high strength hardware, and extension brackets. Manual transmission requires (Shift Extension PN-PA3700). A set of urethane wheel-well extensions (Gap-Guards 2wd & 4wd PN-PA6727) are available separately, and are used to conceal any gaps between the body and frame. For the rear bumper area a one piece rear bumper urethane Gap-Guard is available separately (Rear Bumper Gap-Guard PN-PA6738) and is used to conceal the gap between the tailgate and the rear bumper. This system can be installed in 6 to 7 hours and comes complete with everything necessary for installation.

Benefits:

  • Provides 3-inches of lift without modifying existing suspension components.
  • Allows use of larger diameter tires and factory rims for improved ground clearance.
  • DOES NOT alter the OEM suspension geometry or factory stability control parameters.
  • Maintains the factory smooth ride.
  • Keeps the truck’s center of gravity lower than a comparable suspension lift.

Features:

  • Fiberglass reinforced nylon body blocks
  • CNC machined & zinc plated steering extension
  • Laser cut and powder coated front bumper relocation brackets
  • Laser cut and zinc plated fittings and brackets
  • High strength hardware included
  • Made in the U.S.A.

Notes:

  • Front bumper brackets are included in this kit.
  • It may be necessary to drill the front two body bushing sleeves out to 1/2″ for new bolt clearance.
  • Modification to the front frame horns will be required to raise the front bumper using the bumper brackets included.
  • Front bumper brackets will need to be modified for use on 2-inch kit.
  • Steering extension included.
  • Manual transmission models will require Part# 3700 shift extension (Mazda transmission only).
  • Gap guards available and sold separately for this application.

 

Amazon’s Price:

SKU: DAYPA813 Category: Tag:

Additional information

Weight 20.5 lbs
Manufacturer

Performance Accessories

Related products

1989-1992 Ford Ranger 3-Inch Body LIft
1989-1992 Ford Ranger 3-Inch Body LIft
Performance Accessories 3-inch Body Lift Kit PN-833 raises the vehicle for adding larger diameter tires, without altering the factory suspension system and OE ride characteristics. The kit includes high pressure fiberglass reinforced nylon lift blocks, 3/16 inch thick laser cut and powder coated relocation brackets, a CNC machined and zinc plated steering extension, high strength hardware, and extension brackets. Manual transmission requires (Shift Extension PN-3700). A set of urethane wheel-well extensions (Gap-Guards 2wd & 4wd PN-6727) are available separately, and are used to conceal any gaps between the body and frame in the wheel wells. For the rear bumper area a one piece rear bumper urethane Gap-Guard is available separately (Rear Bumper Gap-Guard PN-6738) and is used to conceal the gap between the tailgate and the rear bumper. This system can be installed in 6 to 7 hours and comes complete with everything necessary for installation. Benefits:
  • Provides 3-inches of lift without modifying existing suspension components.
  • Allows use of larger diameter tires and factory rims for improved ground clearance.
  • DOES NOT alter the OEM suspension geometry or factory stability control parameters.
  • Maintains the factory smooth ride.
  • Keeps the truck's center of gravity lower than a comparable suspension lift.
Features:
  • Fiberglass reinforced nylon body blocks
  • CNC machined & zinc plated steering extension
  • Laser cut and zinc plated fittings and brackets
  • High strength hardware included
  • Made in the U.S.A.
Notes:
  • It may be necessary to drill the front two body bushing sleeves out to 1/2" for new bolt clearance.
  • Steering extension included.
  • Manual transmission models will require Part# 3700 shift extension (Mazda transmission only).
  • Gap guards available and sold separately for this application.
  • No bumper brackets are included in this kit.
  Amazon's Price:
not rated Order Product
1983-1988 Ford Ranger 3-Inch Body Lift
1983-1988 Ford Ranger 3-Inch Body Lift
Performance Accessories 3-inch Body Lift Kit PN-PA813 raises the vehicle for adding larger diameter tires, without altering the factory suspension system and OE ride characteristics. The kit includes high pressure fiberglass reinforced nylon lift blocks, 3/16 inch thick laser cut and powder coated front bumper relocation brackets, a CNC machined and zinc plated steering extension, high strength hardware, and extension brackets. Manual transmission requires (Shift Extension PN-PA3700). A set of urethane wheel-well extensions (Gap-Guards 2wd & 4wd PN-PA6727) are available separately, and are used to conceal any gaps between the body and frame. For the rear bumper area a one piece rear bumper urethane Gap-Guard is available separately (Rear Bumper Gap-Guard PN-PA6738) and is used to conceal the gap between the tailgate and the rear bumper. This system can be installed in 6 to 7 hours and comes complete with everything necessary for installation. Benefits:
  • Provides 3-inches of lift without modifying existing suspension components.
  • Allows use of larger diameter tires and factory rims for improved ground clearance.
  • DOES NOT alter the OEM suspension geometry or factory stability control parameters.
  • Maintains the factory smooth ride.
  • Keeps the truck's center of gravity lower than a comparable suspension lift.
Features:
  • Fiberglass reinforced nylon body blocks
  • CNC machined & zinc plated steering extension
  • Laser cut and powder coated front bumper relocation brackets
  • Laser cut and zinc plated fittings and brackets
  • High strength hardware included
  • Made in the U.S.A.
Notes:
  • It may be necessary to drill the front two body bushing sleeves out to 1/2? for new bolt clearance.
  • Steering extension included.
  • Manual transmission models will require Part# 3700 shift extension (Mazda transmission only).
  • Gap guards available and sold separately for this application.
  • No bumper brackets are included in this kit.
  Amazon's Price:
not rated Order Product
1998-2000 Ford Ranger 3-Inch Body Lift
1998-2000 Ford Ranger 3-Inch Body Lift
Performance Accessories 3-inch Body Lift Kit PN-883 raises the vehicle for adding larger diameter tires, without altering the factory suspension system and OE ride characteristics. The kit includes high pressure fiberglass reinforced nylon lift blocks, 3/16 inch thick laser cut and powder coated front and rear bumper relocation brackets, a CNC machined and zinc plated steering extension, high strength hardware, and extension brackets. Manual Transmission vehicles will need part number (Shift Extension PN-3700). A set of urethane wheel-well extensions (Gap-Guards 2WD Ranger/Edge PN-6737) or (Gap-Guard 2WD Splash PN-6733) or (Gap-Guards All 4WD Models PN-6732) are available separately, and are used to conceal any gaps between the body and frame. This system can be installed in 7 to 8 hours and comes complete with everything necessary for installation. Benefits: • Provides 3” additional lift without modifying existing suspension system. • Allows up to 32” tires and use of factory rims for improved ground clearance. (33” with bumper valance trimmed or torsion bar crank). • DOES NOT alter the OEM suspension geometry. • Maintains the superior Factory ride. • Keeps center of gravity lower than comparable Suspension lift. Features:
  • Fiberglass reinforced nylon body blocks
  • CNC machined & zinc plated steering extension
  • Laser cut and powder coated front and rear bumper relocation brackets
  • Laser cut and zinc plated fittings and brackets
  • High strength hardware included
  • Made in the U.S.A.
Notes:
  • It may be necessary to drill the front two body bushing sleeves out to 1/2" for new bolt clearance.
  • Front and rear bumper brackets are included in this kit.
  • Modification to the front frame horns will be required to raise the front bumper using the bumper brackets included.
  • Steering extension included.
  • Manual transmission models will require Part# 3700 shift extension (Mazda transmission only).
  • Rear bumper brackets are to enhance appearance only, bumper cannot be used for towing.
  • Gap guards available and sold separately for this application.
  Amazon's Price:
not rated Order Product
1995-1997 Ford Ranger 3-Inch Body Lift
1995-1997 Ford Ranger 3-Inch Body Lift
Performance Accessories 3-inch Body Lift Kit PN-853 raises the vehicle for adding larger diameter tires, without altering the factory suspension system and OE ride characteristics. The kit includes high pressure fiberglass reinforced nylon lift blocks, 3/16 inch thick laser cut and powder coated front and rear bumper relocation brackets, a CNC machined and zinc plated steering extension, high strength hardware, and extension brackets. Manual transmission requires (Shift Extension PN-3700). A set of urethane wheel-well extensions (Gap-Guards 96-97 2WD Ranger B-Series PN-6727) or (Gap-Guard 95-97 2WD & 4WD Splash PN-6733) or (Gap-Guards 1995 4WD Models PN-6727) and (Gap-Guard 96-97 4WD Models PN-6732) are available separately, and are used to conceal any gaps between the body and frame. This system can be installed in 7 to 8 hours and comes complete with everything necessary for installation. Benefits:
  • Provides 3-inches of lift without modifying existing suspension components.
  • Allows use of larger diameter tires and factory rims for improved ground clearance.
  • DOES NOT alter the OEM suspension geometry or factory stability control parameters.
  • Maintains the factory smooth ride.
  • Keeps the truck's center of gravity lower than a comparable suspension lift.
Features:
  • Fiberglass reinforced nylon body blocks
  • CNC machined & zinc plated steering extension
  • Laser cut and powder coated front and rear bumper relocation brackets
  • Laser cut and zinc plated fittings and brackets
  • High strength hardware included
  • Made in the U.S.A.
Notes:
  • It may be necessary to drill the front two body bushing sleeves out to 1/2? for new bolt clearance.
  • Front and rear bumper brackets are included in this kit.
  • Modification to the front frame horns will be required to raise the front bumper using the bumper brackets included.
  • Steering extension included.
  • Manual transmission models will require Part# 3700 shift extension (Mazda transmission only).
  • Rear bumper brackets are to enhance appearance only, bumper cannot be used for towing.
  • Gap guards available and sold separately for this application.
  Amazon's Price:
not rated Order Product