Back to 1998-2011 Ford Ranger Lift Kits
superlift_9636

1998-2010 Ford Ranger 4WD Superlift Front Driveshaft

Due to the front driveshaft’s increased operating angle from Superlift’s 4-inch suspension lift, the 1998-2010 Ford Ranger factory driveshaft service life is decreased substantially; expect no more than 20,000 miles.

Superlift’s replacement heavy duty CV style (dual Cardan) driveshaft is designed for higher operating angles.

 

Amazon’s Price:



SKU: 9636 Category: Tag:

Additional information

Manufacturer

Superlift

Related products

1998-2011 Ford Ranger Rough Country CV Front Drive Shaft
1998-2011 Ford Ranger Rough Country CV Front Drive Shaft
Get the most out of your Ford Ranger with Rough Country's Front CV Driveshaft! This extended drive shaft is designed to promote a better geometry on any Ford Ranger with a 5in suspension lift. This upgrade helps eliminate vibration issues and is much more durable than the factory shaft operating on a lifted vehicle.

FEATURES:

  • Collapsed Measurment: 36-3/8 inches
  • Extended Measurment: 39-1/2 inches
  • Reduces drive line vibrations
  • Includes better quality CV joints.
  • Shaft strength is twice as strong as the factory equipped drive shaft.

NOTES - IMPORTANT

  • Works on Ford Ranger with 5in of lift ONLY
 

Amazon's Price:

If unavailable above, CHECK HERE.
not rated Order Product
2000-2010 Ford Ranger 4×4 Superlift 4-Inch Suspension Lift Kit
2000-2010 Ford Ranger 4×4 Superlift 4-Inch Suspension Lift Kit
Superlift's complete knuckle style suspension lift kit for the 2000-2010 Ford Ranger 4wd, providing 4-inches of lift height.
  • New nodular iron knuckles, not ball joint spacers
  • Load bearing bracketry made of .25" thick plate steel or heavy-wall tubing
  • Full width differential / control arm crossmembers provide lateral rigidity
  • Rear lift options: lift blocks
  • Front / rear Superide shocks included
  • Heavy-duty replacement front driveshaft available
  • Limited Lifetime Warranty
  • Satisfaction Guarantee
Allows for 33x12.5 inch tires. The lift kit retains factory ride quality, steering geometry and CV axle angles. All load-bearing bracketry is laser-cut from .25" steel plate. This replacement steering knuckle lift includes lower control arm crossmembers, plus bracketry to lower the torsion bar crossmember. A 3-inch block kit provides rear lift. The lift kit includes front and rear Superide shocks. Expect the factory front drivesahaft to last no more than 20K miles; Superlift offers an optional heavy duty CV style replacement shaft. Note that FX4 models require optional Rear U-bolt Kit P/N 10914. Note: NOT recommended for 2010 models that have Traction Control/Stability Control Amazon's Price:
 
not rated Order Product
Torsion Bar Adjustment Tool for Ford – OTC 7816
Torsion Bar Adjustment Tool for Ford – OTC 7816
OTC Torsion Bar Adjustment Tool for Ford Before servicing a torsion bar on 1998-2011 Ford Ranger vehicles you must first contain the bar to avoid possible damage. This tool securely accomplishes that task allowing you to make adjustments. It is similar to Ford No. 204-185 (T95T-5310-AR).
not rated Order Product
Pro Comp 2.25-Inch Leveling Lift Kit – 62170
Pro Comp 2.25-Inch Leveling Lift Kit – 62170
Pro Comp is the fastest, safest, least expensive way to bring the front of your Vehicle level with the rear. This gives you the clearance and ability to add wheels and tires up to 33" in dia. Pro Comp products do not affect the factory OEM ride quality or comfort. Thats why Pro Comp also offers a lifetime warranty for as long as you own your vehicle against defects for all of our products. Technical Details:
  • Lift Height: 2.25 Inch
  • Two Torsion Keys
  • Hardware Kit
  • Max Tire Size: 33 Inch
  Amazon's Price:
not rated Order Product