Shop - TRS Garage

Ruffstuff Spring Perches, Compatible With Ford 8.8 / 9 / Dana 60

Administrator — Fri, 22 May 2020 07:29:54 +0000

INCLUDES: 2-Perches for one axle DIMENSIONS: Axle diameter: 3 1/4 or 3 1/8" Width: 2.5" This is a new variation on one of our fairly basic items, but it isn't quite that basic. Here's what you want to know: these are .25" (1/4) HR P&O Steel Plate, CNC Laser Cut and then Folded on a 290 ton CNC Brake to final size. Length is 7.75" to help control axle wrap and 2.5" wide to provide a stable platform. They have 3 spring pin mounting options so you can adjust your wheelbase if you wish and are cut to fit a 3 1/4" axle tube but they have 3 - 1/16" nubs so they fit a 3 1/8" (Small 9") tube out of the box, grind off the 3 tiny nubs and they fit a Ford 8.8, D60, and the Ford 9"(3 1/4"), pretty simple. Sold in pairs. These are for spring over applications.

Amazon's Price:

The post Ruffstuff Spring Perches, Compatible With Ford 8.8 / 9 / Dana 60 appeared first on TRS Garage.

Ruffstuff Ford 8.8 Rear Axle Simple Swap (28 spline)

Administrator — Fri, 22 May 2020 07:16:32 +0000

You will receive: 2 - leaf spring plates for 2.5" springs 2 - perch 2 3/4" axle and 2.5" wide 2 - shock brackets 1.5" ID 4 - U-bolts 10"x5/8"x 2 3/4" and hardware This is the basic kit essential for your 28 spline 8.8 Rear Axle swap, more items could be added but this is the bare minimum. You will receive 1 pair of our 3/8" thick A50 Steel U-Bolt plates with 3 pin mounting options, a pair of our 8.8 Spring Perches with the same pin option to match, & 4 - 10" x 5/8" x 2 3/4" U-Bolts with 1/4" laser cut washers and nuts, and a pair of Shock Brackets. This will get your new Axle under the rig. To my knowledge this axle was only used in Ford Rangers in this width.

Amazon's Price:

The post Ruffstuff Ford 8.8 Rear Axle Simple Swap (28 spline) appeared first on TRS Garage.

Ruffstuff Ford 8.8 Rear Axle Simple Swap (31 spline)

Administrator — Fri, 22 May 2020 07:02:56 +0000

You will receive: 2 - leaf spring plates for 2.5" springs 2 - perch 3 1/4" axle and 2.5" wide 2 - shock brackets 1.5" ID 4 - U-bolts 10"x5/8"x 3 1/4" and hardware This is the basic kit essential for your 31 spline 8.8 Rear Axle swap, more items could be added but this is the bare minimum. You will receive 1 pair of our 3/8" thick A50 Steel U-Bolt plates with 3 pin mounting options, a pair of our 8.8 Spring Perches with the same pin option to match, & 4 - 10" x 5/8" x 3 1/4" U-Bolts with 1/4" laser cut washers and nuts, and a pair of Shock Brackets . This will get your new Axle under the rig. BTW, this is NOT a Chinese made product that just can't hang with the big kids, this is the Big Kid. This axle is found in Ford Explorers, F150 trucks, & Ford Broncos.

Amazon's Price:

The post Ruffstuff Ford 8.8 Rear Axle Simple Swap (31 spline) appeared first on TRS Garage.

MUYI 2 Set Standard Fuse Holder 14 Gauge Waterproof

Administrator — Fri, 22 May 2020 05:52:48 +0000

Water-proof in-line Fuse Holder provided by MUYI Features excellent water-proof design with tight-fitting rubber cap, 14 AWG thick copper wire. Fit for standard blade fuse. 30cm/12inches pigtail wire allow you to cut and splice it into any project.

MUYI high quality fuse holder and correct fuse can protects a circuit from overloading in extreme operating conditions or in the event of a short circuit, keep your car and electric device in safe condition.

Specification:
Material:copper(coated with tin), rubber
Condition:100% New
Color:Black with red wire
Operating Temperature: 30?~170?
Fuse holder dimension:41x35x15mm
Wire Length:approx 30cm/12inches
Wire Range:14 AWG
Amp Range of Fuse Holder: 1 to 20A
Fuse Holder Voltage Max Operating:32V DC
For Fuse Series:Standard/Regular Blade Fuse(ATO)
Fuse included: Yes
Feature: Cover. Excellent water-proof design.

Each Set include 1x fuse holder and 1x 20A Standard blade fuse.

Package Included: (2 Set)
2 x Standard Blade Fuse Holders
2 x 20A Standard Blade Fuses

ATTENTION:
1?Fuse holders are designed with 14 AWG wire and they can support fuses rating 2A, 3A, 5A, 7.5A, 10A, 15A, 20A.
2?It is important to select the correct Amp rating before you install or replace fuses even though they come with commonly 2x 20A fuses.
3?Fuse holders are safe for use below Voltage Max Operating: 32V DC

Amazon's Price:

The post MUYI 2 Set Standard Fuse Holder 14 Gauge Waterproof appeared first on TRS Garage.

12 AWG Waterproof in-Line ATC Fuse Holder

Administrator — Fri, 22 May 2020 05:40:00 +0000

Rugged, tough and reliable, invincible marine offers top of the line boating products and marine accessories at affordable prices, and is well-known for their hardworking nautical line. For freshwater and saltwater boating, invincible marine designs products for avid fishermen and weekend boaters. Quality, utility and innovation go into every invincible marine product giving you more time on the water.

Made using the highest quality components
Performance and quality tested
The most trusted name in marine accessories and equipment
ATC fuse holder protects on board electronics
Takes up to a 30-amp fuse
Used in most recreational vehicles, this fuse holder comes with cap to seal out moisture
12-gauge wire leads for easy hook-ups
Comes with a 1-year warranty

Amazon's Price:

The post 12 AWG Waterproof in-Line ATC Fuse Holder appeared first on TRS Garage.

MUYI 2 Sets Inline Fuse Holder 10 Gauge Waterproof

Administrator — Fri, 22 May 2020 05:31:44 +0000

10 AWG thick red pigtail wire allow you to splice it into any project.
Wire length: 6 inches 10 gauge wire each side, Fuse holder dimension: 41x35x15mm
Waterproof design, the rubber cap fits on tightly to protect any standard blade fuse inside. NOT easy to fall off or let water in.
Inline Fuse Holder for standard blade fuses, Suitable for 1A,2A,3A,5A,7.5A,10A,15A,20A,30A,40A, ideal for car truck trailer atv boat marine
Package Included: 2 X Standard Blade Fuse Holder and 2 X 40Amp Standard Blade Fuse

Amazon's Price:

The post MUYI 2 Sets Inline Fuse Holder 10 Gauge Waterproof appeared first on TRS Garage.

10 AWG In-Line Blade ATC/ATO Waterproof Fuse Holder

Administrator — Fri, 22 May 2020 05:22:02 +0000

Heavy duty 10 gauge(AWG) In-line fuse holder Cable for ATC/ATO type fuses (Blade Large Size Fuse Holder).
Waterproof design, rubber cap fits tightly to protect the fuse inside any standard blade. It's not easy to fall off or drain, so you can easily modify your car's electronics in a safe way. Don't worry about bursting or overloading that can damage your car's power train.
Built-in fuse holder for standard blade fuses, suitable for 1A, 2A, 3A, 5A, 7.5A, 10A, 15A, 20A, 30A, 40A,50A,60A, ideal for car boat truck auto use,added protection to the circuit.
Material:copper+rubber,fuse holder size: 3.1 x 2.4 x 0.6 inch.
Package Included: 1 X 10AWG Blade Fuse Holder .Fuse not included.

Amazon's Price:

The post 10 AWG In-Line Blade ATC/ATO Waterproof Fuse Holder appeared first on TRS Garage.

8 AWG Waterproof Inline Fuse Holder

Administrator — Fri, 22 May 2020 05:10:33 +0000

Automotive and Marine applications (motorcycle, RTV, ATV, truck, car, trailer, snowmobile). Fuse holder with 5 AMP Fuse. Marine grade MAXI fuse holders which are waterproof with a tight fitting soft vinyl cap. Each has a 6 inch wire loop which is 8 AWG.

Waterpoof Sealed Cap
Automotive Style Fuses
Comes with 40A MAXI Fuse
8 Gauge Red Wire
High Quality

Amazon's Price:

The post 8 AWG Waterproof Inline Fuse Holder appeared first on TRS Garage.

12V Waterproof Universal Fuse Relay Box

Administrator — Fri, 22 May 2020 04:08:44 +0000

IP65 Waterproof 6-Slot ATC/ATO Fuse + 6-Slot 5-Pin Relay Box

Trying to organize harnesses, fuses, and relays can quickly have you driving in circles. Get your bearings with a dedicated, waterproof relay box. Like a trail map for your wiring, our relay box is the most efficient way to consolidate, organize, and keep track of all your aftermarket accessories. Boasting a six relay/fuse capacity, this relay box is more than capable of powering and protecting up to six independent circuits.

Durable Nylon 66 Construction
IP65 Waterproof
6 Relay and Fuse Sockets
Comes with ALL Needed Seals and Terminals

What's Included?

(1) Waterproof Fuse Relay Box
(1) Pack of Relay Rubber Pads
(1) Pack of Fuse Rubber Pads
(1) Pack of Relay Wire Terminals
(1) Pack of Fuse Wire Terminals
(1) Pack of Brackets and Fasteners
(1) Rubber Gasket
(1) Waterproof Ring
(1) Instruction Manual

Details & Specs

Front Dimension: L1: 8-13/16", L2: 6-7/16", H1: 3-3/4", H2: 3-3/16",M1: 5-7/8", M2: 8-5/16"
Side Dimension: W1: 6", W2: 3-15/16", M3: 3-3/32", M4: 5-1/2"
Package & Dimension: Length (In): 6.25, Width (In): 2.63, Height (In): 2.88

Amazon's Price:

The post 12V Waterproof Universal Fuse Relay Box appeared first on TRS Garage.

6-Way 12V Blade Fuse Box W/LED Indicator & Cover

Administrator — Fri, 22 May 2020 03:18:03 +0000

Specifications

Voltage(Max): 32V DC
Input Terminal Rating: #10-32 threaded studs (100A max.)
Output Terminal Rating: 30A max. per circuit
Connecting Terminal Specification
Input Wire Size: #4-6 AWG
Output Wire Size: #12-16 AWG
Mounting Hole Dimensions: 11"x6.7" (29*17cm)
Terminal Dim Dimensions: 2.52" (6.4cm)
Blade Fuse Dim Dimensions: 7.88"x7.88"x6.3" (20*20*16cm)
Temperature Rating: -20 to 85 degrees
Torque Rating: 20in-lb (2.25Nm) max
Mounting Torque Rating: 8 in-lb (0.9Nm) max
Materials: PC Cover (Transparent)+ PBT Base(Black) + POM Push Bottom (White) + Tin-plating Copper

Features:

Temperature Rating :-20 degrees to 85 degrees
High quality construction
Maximum of 30 Amp per circuit and 100 Amp per panel
Clear cover included for additional protection
The fuse will cut off the current auto when it rise in the current to a certain temperature, so as to protect the safe operation of the circuit
PBT shell (flame retardant, resistance to high and low temperature environmental protection material)
Transparent cover for dust & humid protection
Rugged, light weight construction
Can be installed in circuit
Can be fixed through (2) pre molded holes on side
Each fuse holder is numbered to make fuse installation and identification as easy as possible.
The product with red LED warning light, corresponding to each fuse piece connected to the electrical accessories, Red LED illuminates when fuse is blown.
It is a perfect kit for adding a few circuits to your auto, boat, off-road or others if all you need is something simple. Made of tin-plated copper common sourced bus, good productivity and corrosion-resistant, it is the absolute best!

Amazon's Price:

The post 6-Way 12V Blade Fuse Box W/LED Indicator & Cover appeared first on TRS Garage.