Additional information
| Manufacturer | Superlift |
|---|
Back to 1998-2011 Ford Ranger Lift Kits
2000-2010 Ford Ranger 4×4 Superlift 4-Inch Suspension Lift Kit
Superlift’s complete knuckle style suspension lift kit for the 2000-2010 Ford Ranger 4wd, providing 4-inches of lift height.
- New nodular iron knuckles, not ball joint spacers
- Load bearing bracketry made of .25″ thick plate steel or heavy-wall tubing
- Full width differential / control arm crossmembers provide lateral rigidity
- Rear lift options: lift blocks
- Front / rear Superide shocks included
- Heavy-duty replacement front driveshaft available
- Limited Lifetime Warranty
- Satisfaction Guarantee
Allows for 33×12.5 inch tires.
The lift kit retains factory ride quality, steering geometry and CV axle angles. All load-bearing bracketry is laser-cut from .25″ steel plate.
This replacement steering knuckle lift includes lower control arm crossmembers, plus bracketry to lower the torsion bar crossmember.
A 3-inch block kit provides rear lift. The lift kit includes front and rear Superide shocks.
Expect the factory front drivesahaft to last no more than 20K miles; Superlift offers an optional heavy duty CV style replacement shaft.
Note that FX4 models require optional Rear U-bolt Kit P/N 10914.
Note: NOT recommended for 2010 models that have Traction Control/Stability Control
Amazon’s Price:
Related products
Torsion Bar Adjustment Tool for Ford – OTC 7816
OTC Torsion Bar Adjustment Tool for Ford Before servicing a torsion bar on 1998-2011 Ford Ranger vehicles you must first contain the bar to avoid possible damage. This tool securely accomplishes that task allowing you to make adjustments. It is similar to Ford No. 204-185 (T95T-5310-AR).
ReadyLift 2.25-Inch Leveling Lift Kit – 66-2020
ReadyLIFT leveling kits are the fastest, safest, least expensive way to bring the front of your vehicle level with the rear. Our forged torsion keys are designed to grab the FLAT of the torsion bar for a tighter, sturdier fit. CNC machined adjuster bolt pockets ensuring an accurate and safe adjustment. Only ReadyLIFT torsion keys are forged, making them 25% stronger than OEM and designed to last the life of your vehicle.
Tire Fitment:
- 32" Maximum tire diameter
- 32x10.50 for no rub on a 8" wide wheel with 0 offset
- 17" - 275/70R17
- 18" - 255/70R18
- 20" - 265/60R20
1998-1999 Ford Ranger 4×4 Superlift 4-Inch Suspension Lift Kit
This is Superlift's complete knuckle style suspension lift kit for the 1998-1999 Ford Ranger 4wd; providing 4-inches of lift height.
- New nodular iron knuckles, not ball joint spacers
- Load bearing bracketry made of .25" thick plate steel or heavy-wall tubing
- Full width differential / control arm crossmembers provide lateral rigidity
- Rear lift achieved via blocks
- Front / rear Superide shocks included
- Heavy-duty replacement front driveshaft available
- Limited Lifetime Warranty
- Satisfaction Guarantee
1998-2011 Ford Ranger Rough Country CV Front Drive Shaft
Get the most out of your Ford Ranger with Rough Country's Front CV Driveshaft! This extended drive shaft is designed to promote a better geometry on any Ford Ranger with a 5in suspension lift. This upgrade helps eliminate vibration issues and is much more durable than the factory shaft operating on a lifted vehicle.
If unavailable above, CHECK HERE.
FEATURES:
- Collapsed Measurment: 36-3/8 inches
- Extended Measurment: 39-1/2 inches
- Reduces drive line vibrations
- Includes better quality CV joints.
- Shaft strength is twice as strong as the factory equipped drive shaft.
NOTES - IMPORTANT
- Works on Ford Ranger with 5in of lift ONLY