Back to Ford Ranger Body Lifts
ford_ranger_body_lift_853-menu

1995-1997 Ford Ranger 3-Inch Body Lift

Performance Accessories 3-inch Body Lift Kit PN-853 raises the vehicle for adding larger diameter tires, without altering the factory suspension system and OE ride characteristics. The kit includes high pressure fiberglass reinforced nylon lift blocks, 3/16 inch thick laser cut and powder coated front and rear bumper relocation brackets, a CNC machined and zinc plated steering extension, high strength hardware, and extension brackets. Manual transmission requires (Shift Extension PN-3700). A set of urethane wheel-well extensions (Gap-Guards 96-97 2WD Ranger B-Series PN-6727) or (Gap-Guard 95-97 2WD & 4WD Splash PN-6733) or (Gap-Guards 1995 4WD Models PN-6727) and (Gap-Guard 96-97 4WD Models PN-6732) are available separately, and are used to conceal any gaps between the body and frame. This system can be installed in 7 to 8 hours and comes complete with everything necessary for installation.

Benefits:

  • Provides 3-inches of lift without modifying existing suspension components.
  • Allows use of larger diameter tires and factory rims for improved ground clearance.
  • DOES NOT alter the OEM suspension geometry or factory stability control parameters.
  • Maintains the factory smooth ride.
  • Keeps the truck's center of gravity lower than a comparable suspension lift.

Features:

  • Fiberglass reinforced nylon body blocks
  • CNC machined & zinc plated steering extension
  • Laser cut and powder coated front and rear bumper relocation brackets
  • Laser cut and zinc plated fittings and brackets
  • High strength hardware included
  • Made in the U.S.A.

Notes:

  • It may be necessary to drill the front two body bushing sleeves out to 1/2? for new bolt clearance.
  • Front and rear bumper brackets are included in this kit.
  • Modification to the front frame horns will be required to raise the front bumper using the bumper brackets included.
  • Steering extension included.
  • Manual transmission models will require Part# 3700 shift extension (Mazda transmission only).
  • Rear bumper brackets are to enhance appearance only, bumper cannot be used for towing.
  • Gap guards available and sold separately for this application.

 

Amazon's Price:



SKU: DAYPA853 Category: Tag:

Additional information

Weight 25.6 lbs
Manufacturer

Performance Accessories

Related products

1998-2000 Ford Ranger 3-Inch Body Lift
1998-2000 Ford Ranger 3-Inch Body Lift
Performance Accessories 3-inch Body Lift Kit PN-883 raises the vehicle for adding larger diameter tires, without altering the factory suspension system and OE ride characteristics. The kit includes high pressure fiberglass reinforced nylon lift blocks, 3/16 inch thick laser cut and powder coated front and rear bumper relocation brackets, a CNC machined and zinc plated steering extension, high strength hardware, and extension brackets. Manual Transmission vehicles will need part number (Shift Extension PN-3700). A set of urethane wheel-well extensions (Gap-Guards 2WD Ranger/Edge PN-6737) or (Gap-Guard 2WD Splash PN-6733) or (Gap-Guards All 4WD Models PN-6732) are available separately, and are used to conceal any gaps between the body and frame. This system can be installed in 7 to 8 hours and comes complete with everything necessary for installation. Benefits: • Provides 3” additional lift without modifying existing suspension system. • Allows up to 32” tires and use of factory rims for improved ground clearance. (33” with bumper valance trimmed or torsion bar crank). • DOES NOT alter the OEM suspension geometry. • Maintains the superior Factory ride. • Keeps center of gravity lower than comparable Suspension lift. Features:
  • Fiberglass reinforced nylon body blocks
  • CNC machined & zinc plated steering extension
  • Laser cut and powder coated front and rear bumper relocation brackets
  • Laser cut and zinc plated fittings and brackets
  • High strength hardware included
  • Made in the U.S.A.
Notes:
  • It may be necessary to drill the front two body bushing sleeves out to 1/2" for new bolt clearance.
  • Front and rear bumper brackets are included in this kit.
  • Modification to the front frame horns will be required to raise the front bumper using the bumper brackets included.
  • Steering extension included.
  • Manual transmission models will require Part# 3700 shift extension (Mazda transmission only).
  • Rear bumper brackets are to enhance appearance only, bumper cannot be used for towing.
  • Gap guards available and sold separately for this application.
  Amazon's Price:
not rated Order Product
1993-1994 Ford Ranger 3-Inch Body Lift
1993-1994 Ford Ranger 3-Inch Body Lift
Performance Accessories 3-inch Body Lift Kit PN-PA813 raises the vehicle for adding larger diameter tires, without altering the factory suspension system and OE ride characteristics. The kit includes high pressure fiberglass reinforced nylon lift blocks, 3/16 inch thick laser cut and powder coated front bumper relocation brackets, a CNC machined and zinc plated steering extension, high strength hardware, and extension brackets. Manual transmission requires (Shift Extension PN-PA3700). A set of urethane wheel-well extensions (Gap-Guards 2wd & 4wd PN-PA6727) are available separately, and are used to conceal any gaps between the body and frame. For the rear bumper area a one piece rear bumper urethane Gap-Guard is available separately (Rear Bumper Gap-Guard PN-PA6738) and is used to conceal the gap between the tailgate and the rear bumper. This system can be installed in 6 to 7 hours and comes complete with everything necessary for installation. Benefits:
  • Provides 3-inches of lift without modifying existing suspension components.
  • Allows use of larger diameter tires and factory rims for improved ground clearance.
  • DOES NOT alter the OEM suspension geometry or factory stability control parameters.
  • Maintains the factory smooth ride.
  • Keeps the truck's center of gravity lower than a comparable suspension lift.
Features:
  • Fiberglass reinforced nylon body blocks
  • CNC machined & zinc plated steering extension
  • Laser cut and powder coated front bumper relocation brackets
  • Laser cut and zinc plated fittings and brackets
  • High strength hardware included
  • Made in the U.S.A.
Notes:
  • Front bumper brackets are included in this kit.
  • It may be necessary to drill the front two body bushing sleeves out to 1/2" for new bolt clearance.
  • Modification to the front frame horns will be required to raise the front bumper using the bumper brackets included.
  • Front bumper brackets will need to be modified for use on 2-inch kit.
  • Steering extension included.
  • Manual transmission models will require Part# 3700 shift extension (Mazda transmission only).
  • Gap guards available and sold separately for this application.
  Amazon's Price:
not rated Order Product
2001-2011 Ford Ranger 3-Inch Body Lift
2001-2011 Ford Ranger 3-Inch Body Lift
The Performance Accessories Body Lift kit designed for this platform resulted in our bestselling Ford kit to date. The affordability of this kit results from the fact it augments the existing OEM suspension for both 2 Wheel Drive and 4 Wheel Drive vehicles by providing 3” of additional lift and allowing up to 32” tires. This is an “easy to install” kit that comes with all necessary kit components to maintain the OEM lines. Included in this kit are heavy duty laser cut front and rear bumper relocation brackets, CNC machined and zinc plated steering extensions, laser cut and zinc plated radiator relocation brackets, zinc plated square bed support channel, High Strength fastener hardware, and of course our industry renowned Fiber-Glass reinforced Nylon body blocks. (Manual Transmission Requires PN-PA3700). A set of urethane wheel-well extensions (Gap-Guards 2WD PN-PA6737) or (Gap-Guards 2WD Splash Only PN-PA6733) or (Gap-Guards 4WD PN-PA6732) are available separately, and are used to conceal any gaps between the body and frame. This system can be installed in 5 to 6 hours and comes complete with everything necessary for installation. Benefits: • Provides 3” additional lift without modifying existing suspension system. • Allows up to 32” tires and use of factory rims for improved ground clearance. (33” with bumper valance trimmed or torsion bar crank). • DOES NOT alter the OEM suspension geometry. • Maintains the superior Factory ride. • Keeps center of gravity lower than comparable Suspension lift. Features: • Fiber-Glass reinforced Nylon body blocks • CNC machined and zinc plated steering extensions • Heavy Duty Bumper relocation brackets to maintain OEM look • Laser cut and Powder Coated Front and Rear Bumper relocation brackets • Laser cut and Zinc Plated fittings and brackets • High Strength fastener kits   Amazon's Price:
not rated Order Product
1989-1992 Ford Ranger 3-Inch Body LIft
1989-1992 Ford Ranger 3-Inch Body LIft
Performance Accessories 3-inch Body Lift Kit PN-833 raises the vehicle for adding larger diameter tires, without altering the factory suspension system and OE ride characteristics. The kit includes high pressure fiberglass reinforced nylon lift blocks, 3/16 inch thick laser cut and powder coated relocation brackets, a CNC machined and zinc plated steering extension, high strength hardware, and extension brackets. Manual transmission requires (Shift Extension PN-3700). A set of urethane wheel-well extensions (Gap-Guards 2wd & 4wd PN-6727) are available separately, and are used to conceal any gaps between the body and frame in the wheel wells. For the rear bumper area a one piece rear bumper urethane Gap-Guard is available separately (Rear Bumper Gap-Guard PN-6738) and is used to conceal the gap between the tailgate and the rear bumper. This system can be installed in 6 to 7 hours and comes complete with everything necessary for installation. Benefits:
  • Provides 3-inches of lift without modifying existing suspension components.
  • Allows use of larger diameter tires and factory rims for improved ground clearance.
  • DOES NOT alter the OEM suspension geometry or factory stability control parameters.
  • Maintains the factory smooth ride.
  • Keeps the truck's center of gravity lower than a comparable suspension lift.
Features:
  • Fiberglass reinforced nylon body blocks
  • CNC machined & zinc plated steering extension
  • Laser cut and zinc plated fittings and brackets
  • High strength hardware included
  • Made in the U.S.A.
Notes:
  • It may be necessary to drill the front two body bushing sleeves out to 1/2" for new bolt clearance.
  • Steering extension included.
  • Manual transmission models will require Part# 3700 shift extension (Mazda transmission only).
  • Gap guards available and sold separately for this application.
  • No bumper brackets are included in this kit.
  Amazon's Price:
not rated Order Product