Winch Bumper
Showing all 8 results
2019-2020 Ford Ranger Warn 103322 Trans4mer Mid-Frame Mounting Kit
The WARN 103322 Base Winch Mount System is commercial-grade and designed for the 2019-2020 Ford Ranger and includes the mounting bracket as well as a mid-frame winch carrier. Pull-tested and certified to withstand 12, 000 lbs. of pulling force, allowing this winch mount to be compatible with foot-down mounted winches up to 12, 000 lbs. in pulling capacity. The innovative design reduces the install time due to no cutting, drilling, or grinding required during installation. Includes provisions to mount lights and J-Hooks for recovery, and is designed, tested, and made in the USA. Fits WARN winches such as Zeon, Zeon Platinum, VR, M8, XD9, and 9. 5xp. Note: this will restrict the use of adaptive cruiser control and front parking sensors.
- Base winch mount system for 2019-2020 Ford Ranger; Includes mounting bracket and mid-frame winch carrier
- Pull-tested and certified to withstand 12, 000 lbs. of pulling force
- Compatible with foot-down mounted winches up to 12, 000 lbs. in pulling capacity; Fits WARN winches such as Zeon, Zeon Platinum, VR, M8, XD9, and 9. 5xp
- No cutting, drilling, or grinding is required for installation allowing for reduced install time
- Includes provisions to mount lights and J-Hooks for recovery; Designed, tested, and made in the USA
Amazon's Price
2019-2020 Ford Ranger Warn 103379 Trans4mer Full Grille Guard
The WARN 103379 Bolt-On Full Grille Guard is winch compatible, commercial-grade, and designed for the 2019-2020 Ford Ranger. It provides heavy-duty protection for the vehicle’s bumper, grille, fascia, and winch mounting system. Features a flat side member design with a stylized and replaceable rubber trim, includes 2" tubular cross members (one with welded tabs to mount lights), and includes durable, welded headlight guards. The innovative design reduces the install time due to no cutting, drilling, or grinding required during installation. The WARN 103379 Bolt-On Full Grille Guard requires WARN PN 103322 mount system and is designed, tested, and made in the USA. Note: this will restrict the use of adaptive cruiser control and front parking sensors.
- Bolt-on full grille guard for 2019-2020 Ford Ranger; Provides protection for the vehicle’s bumper, grille, fascia, and winch mounting system
- Features flat side member design with a stylized and replaceable rubber trim
- Includes 2" tubular cross members, one with welded tabs to mount lights, and durable, welded headlight guards
- No cutting, drilling, or grinding is required for installation allowing for reduced install time
- Requires WARN PN 103322 mount system; Designed, tested, and made in the USA
Amazon's Price
2019-2020 Ford Ranger Stealth Fighter Winch Bumper
Give your Ford Ranger an upgrade with the Stealth Fighter steel plate front winch bumper. A modern radius plate design allows the Stealth Fighter bumper to keep a tight fit to the front of the truck, while also providing your Ford Ranger with additional front-end protection.
Each Stealth Fighter bumper comes equipped with our patented universal light mount system in the center of the bumper. Mount up to 10 cube lights or a 40" radius light bar. Mix and match any brand and size light to give your Ford Ranger the optimal lighting setup that you need on your off-road adventures. Additional lighting behind the side panels can mount a single cube light per side.
Reinforced clevis mounts are designed to accept 3/4" D-Rings for extra added utility.
Features
- Winch mount
- Modern radius plate design
- Universal light mount / Up to 10 cube lights or a 40" radius light bar
- Mounts for cube lights behind side panels
- 100% direct bolt-on
- Reinforced clevis mounts
Amazon's Price:
2019-2020 Ford Ranger Stealth Fighter Winch Bumper W/ Sensor Cutouts
Give your Ford Ranger an upgrade with the Stealth Fighter steel plate winch bumper. A modern radius plate design allows the Stealth Fighter bumper to keep a tight fit to the front of the truck, while also providing your Ford Ranger with additional front-end protection.
Each Stealth Fighter bumper comes equipped with our patented universal light mount system in the center of the bumper. Mount up to 10 cube lights or a 40" radius light bar. Mix and match any brand and size light to give your Ford Ranger the optimal lighting setup that you need on your off-road adventures. Additional lighting behind the side panels can mount a single cube light per side.
Reinforced clevis mounts are designed to accept 3/4" D-Rings for extra added utility.
FEATURES
- Winch mount
- Sensor cutouts
- Modern radius plate design
- Universal light mount / Up to 10 cube lights or a 40" radius light bar
- Mounts for cube lights behind side panels
- 100% direct bolt-on
- Reinforced clevis mounts
- Made in America
Amazon's Price:
1998-2011 Ford Ranger Winch Bumper with Bull Bar
Ford Ranger Modular Front Winch Bumper with Bull Bar
This bumper fits model years Ford Ranger from 1998 to 2011
- 3-Piece Modular bumper design
- End pieces 1/8" thick bolt to the main center section 3/16"
- Bolt on Bull Bar
- Includes (2) 1" thick shackle tabs
- 3/16" Winch Mount with our trademark Bottle Opener
- Winch ready using the market standard 10" x 4.5" bottom foot mounting profile
- 3/16" mounting brackets
- Easy Bolt-on Installation
- Hand built in the USA!
- All bumpers ship unfinished/bare metal and are ready for your paint, powder coat etc.
1993-1997 Ford Ranger Winch Bumper with Bull Bar
Master Fabricator Dan "Tubby" Billig gives you his Ford Ranger Modular Front Winch Bumper.
This bumper fits model years Ford Ranger from 1993 to 1997
- 3-Piece Modular bumper design
- End pieces 1/8" thick bolt to the main center section 3/16"
- Available with optional bolt on Bull Bar Includes
- (2) 1" thick shackle tabs
- 3/16" Winch Mount with our trademark Bottle Opener
- Winch ready using the market standard 10" x 4.5" bottom foot mounting profile
- 3/16" mounting brackets
- Easy Bolt-on Installation
- Hand built in the USA!
- This bumper will also fit the 1998-2011 Ranger if you ever decide to purchase one in the future
- All bumpers ship unfinished/bare metal and are ready for your paint, powder coat etc.
1983-1992 Ford Ranger Winch Bumper with Bull Bar
Master Fabricator Dan "Tubby" Billig gives you his Ford Ranger/Bronco II Front Winch Bumper with Prerunner bars. This bumper fits model years Ford Ranger (1983-1992)/ Ford Bronco II (1984-1990)
• CNC cut and formed from 1/8" Steel.
• Includes (2) 1" thick shackle tabs.
• 1/4? Winch Mount with our trademark Bottle Opener.
• Winch ready using the market standard 10" x 4.5" bottom foot mounting profile.
• Includes 1/4" mounting brackets
• Easy Bolt-on Installation.
• Hand built in the USA!
All bumpers ship unfinished/bare metal and are ready for your paint, powder coat etc.
1998-2003 Ford Ranger Warn Winch Bumper
** I think these Warn winch bumpers are expensive, and you have to piece them together. There isn't a part number for a complete setup. But since I've been asked about them, I'm adding it to the list. Warn only lists them for the 1998-2003 Ford Ranger. Not sure why it stops at the 2003 model year. They also no longer list them for the 1987 and older Ford Rangers. **
The Grille Guard kit: the foundation of the Trans4mer mounting system, a simple, bolt-on system that installs around the factory bumpers. Comprised of two uprights and two crossbars. This is an integral required component that provides the base for all other options. The original WARN Trans4mer can be configured in several ways to match your needs. This system is engineered so the Grille Guard uprights bolt directly to the vehicle's frame, and the Winch Carrier then bolts to the Grille Guard uprights. All components are sold separately, so you can configure the system to meet your needs.
Below are the individual parts you will need to order.
Grill Guard P/N 37133:
Winch Carrier P/N 29165:
Brush Guard P/N 30146 (optional):