Warn Archives - TRS Garage

2019-2020 Ford Ranger Warn 103322 Trans4mer Mid-Frame Mounting Kit

Sun, 17 May 2020 09:18:51 +0000

The WARN 103322 Base Winch Mount System is commercial-grade and designed for the 2019-2020 Ford Ranger and includes the mounting bracket as well as a mid-frame winch carrier. Pull-tested and certified to withstand 12, 000 lbs. of pulling force, allowing this winch mount to be compatible with foot-down mounted winches up to 12, 000 lbs. in pulling capacity. The innovative design reduces the install time due to no cutting, drilling, or grinding required during installation. Includes provisions to mount lights and J-Hooks for recovery, and is designed, tested, and made in the USA. Fits WARN winches such as Zeon, Zeon Platinum, VR, M8, XD9, and 9. 5xp. Note: this will restrict the use of adaptive cruiser control and front parking sensors.

Base winch mount system for 2019-2020 Ford Ranger; Includes mounting bracket and mid-frame winch carrier
Pull-tested and certified to withstand 12, 000 lbs. of pulling force
Compatible with foot-down mounted winches up to 12, 000 lbs. in pulling capacity; Fits WARN winches such as Zeon, Zeon Platinum, VR, M8, XD9, and 9. 5xp
No cutting, drilling, or grinding is required for installation allowing for reduced install time
Includes provisions to mount lights and J-Hooks for recovery; Designed, tested, and made in the USA

The post 2019-2020 Ford Ranger Warn 103322 Trans4mer Mid-Frame Mounting Kit appeared first on TRS Garage.

]]>

Warn 9790 Manual Hubs For Dana 44

Fri, 23 Feb 2018 01:19:29 +0000

Notes:

Vehicles with full time 4 wheel drive will require a transfer case conversion kit.

When replacing automatic 3 hole cap screw hubs, you must purchase corresponding spindle nut conversion kit.

Will Not Fit 1987-Early 1988 Ford Bronco & F-150 Models Vehicles, Flange Mount

For 19 spline axles.

Sold as a pair.

Vehicle Applications:

Chevrolet/ GMC:

1969-1991 Blazer, Jimmy, Suburban (Spindle nut #32720)
1969-1987 1/2 Ton (Spindle nut #32720)
1977-1987 3/4 Ton (Spindle nut #32720)

Dodge:

1969-1974 1/2 Ton & Ramcharger
1980-1993 1/2, 3/4 Ton, & Ramcharger

Ford:

1966-1996 Bronco (Spindle nut #32720)
1959-1996 1/2 Ton (Spindle nut #32720)
1959-1975 3/4 Ton
1977.5-1997 3/4 Ton Light Duty (Spindle nut #32720)

International Harvester:

1/2 Ton, Travelall

Jeep:

1974-1991 J-10 Pickup, Commander
1977-1987 J-20 Pickup

Instructions

Click HERE

The post Warn 9790 Manual Hubs For Dana 44 appeared first on TRS Garage.

]]>

Warn 20990 Premium Hubs For Dana 44

Fri, 23 Feb 2018 00:44:57 +0000

Notes:

Vehicles with full time 4 wheel drive will require a transfer case conversion kit.

When replacing automatic 3 hole cap screw hubs, you must purchase corresponding spindle nut conversion kit.

Will Not Fit 1987-Early 1988 Ford Bronco & F-150 Models Vehicles, Flange Mount

For 19 spline axles.

Sold as a pair.

The post Warn 20990 Premium Hubs For Dana 44 appeared first on TRS Garage.

]]>

Warn 20825 Service Kit For Dana 44 Premium Hub

Thu, 22 Feb 2018 23:43:37 +0000

This kit is for Warn 20990 Dana 44 Premium Hubs ONLY.

The Warn 20990 Premium Hubs fit the:

1966-1996 Ford Bronco
1959-1996 Ford 1/2 Ton Pickup (F-100 / F-150)

Contains:

12 Allen head cap screws
2 small axle shaft retaining rings
2 large axle tube retaining rings
2 large cap O-rings

Instructions:

Click HERE

The post Warn 20825 Service Kit For Dana 44 Premium Hub appeared first on TRS Garage.

]]>

Warn 39128 Service Kit For Dana 28 / 35 Manual Hubs

Wed, 21 Feb 2018 22:03:25 +0000

This is a service replacement kit, designed to fit with WARN flange mount hub sets.

This kit will fit the following WARN Standard hub set:

29070 and 29071.

A service kit is composed of a various collection of O-rings to aid in maintaining WARN hub sets.

The post Warn 39128 Service Kit For Dana 28 / 35 Manual Hubs appeared first on TRS Garage.

]]>