Snatch Blocks - Shackles - Dampers
Showing 1–12 of 13 results
Smittybilt 17,600 lb Snatch Block
The multi-purpose snatch block will double the pulling power of any winch and can change your pulling direction without damaging the wire rope. Us of the snatch block will also help in reducing heat build up and amperage draw.
- Greasable fitting for continued smooth operation
- Doubles the pulling power of your winch
- 17,600 lbs capacity for self recovery winches
- Works with 7/32 - 3/8” cables (Universal Fit)
- Helps with angled pulls
- Black powder coated
Rugged Ridge 30,000 lb Snatch Block
Use the Rugged Ridge Snatch Block Pulley to double your winch capacity! This durable 9” long pulley is constructed from 1/4” cold rolled steel and is suitable for use up to 30,000lbs. For use with winch cables up to 1/2” in diameter. The pulley can be used to double the capacity for your winch, or to reduce the strain on the winch motor and your electrical system. For recovery operations were a straight pull is not viable option, the pulley helps change the angle of your pull.
- Cold rolled steel
- 30,000 Lb working load limit
- Up to 1/2 cable or rope
- 9-inch pulley
- Double the capacity for your winch or reduce strain
Warn 20,000 lb Snatch Block
Used properly, the multi-purpose Warn Snatch Block can double the pulling power of any winch, or change your pulling direction without damaging the wire rope. They also help to reduce heat buildup and amperage draw. 19,000 pound maximum capacity snatch block, with grease port and overload indicator. For winch capacities to 9,500 pounds with 5/16 inch wire rope.
- 20,000 lbs maximum capacity snatch block
- With grease port and overload indicator
- For winch capacities to 10,000 lbs with 5/16" (8mm) wire rope
Warn 12,000 lb Epic Snatch Block
Designed to help off roaders get the most out of their WARN winch, withstand the elements and look great, the newly available WARN Epic Winching Accessories take optimal performance to another level. Featuring a Warn-exclusive 12-stage coating process; utilizing e-coat and powder coatings, these market leading accessories deliver visual appeal, improved impact-resistance and a longer wear cycle than standard winch accessories.
- Able to accept both wire and synthetic rope
- Helps reduce heat buildup and amp draw during recovery
- Double pulling power of any winch
- Change pulling direction without damaging rope
- 12,000 lb. capacity
Rugged Ridge Snatch Block with Damper Kit
The Rugged Ridge Snatch Block Pulley has two distinct purposes in vehicle recovery. The Snatch Block Pulley permits you to perform offset pulls effectively when the anchor point is not directly in line with the stuck vehicle. Also, the pulley allows you to perform a double line pull, effectively doubling the pulling power of your winch and reducing the strain on the winch motor, for those times when you are REALLY stuck or you are recovering a vehicle larger than yours. We have paired our 20,000 lbs. snatch block pulley with a high-visibility winch line dampener for a versatile addition to your recovery gear kit.
Amazon's Price:
Rugged Ridge Winch Line Dampener
Safety is the most import part of any off-road recovery operation. The Rugged Ridge Winch Line Dampener helps reduce the risk of injury due to recoil in the in event of a winch line or recovery strap failure. The dampener is manufactured from durable vinyl and features heavy-duty storage pockets, and a reflective band. It folds up for easy storage and can been worn as a safety vest. Fits all winch cables and recovery straps up to 3” wide. Simply place the dampener on your recovery line and add weight to the pockets to help absorb energy, and reduce the whip of a failed winch cable.
Technical Details:
Technical Details:
- Durable vinyl construction
- Two easily accessible exterior storage pockets
- High visibility orange with front reflective strip
- Doubles as a safety vest
- Fits all winch cables and recovery straps up to 3” wide
- Hook and loop attachment
Warn Winch Damper
The Warn Winch Damper helps to prevent rope recoil in the event of a rope failure. While rope failure does not happen often, this damper will help the rope fall to the ground if such an event were to occur. Made from durable vinyl, the Warn Winch Damper also features a pocket for rigging accessories, a rubber-coated center section to prevent it from sliding down the line, and a reflective strip for increased visibility. The product also complies with 4WD competition damper regulations.
Technical Details:
- Rubber-coated center section guards against sliding
- Durable vinyl construction
- Pocket for accessory storage
- Reflective strip for increased visibility
- Complies with 4WD competition damper requirements
Smittybilt 3/4 Inch D-Ring Shackle
Smittybilt 3/4" Black D-Ring is designed for high quality towing. It is made from strong material and is plated with zinc coating to prevent corrosion. This ring is highly durable and ensures easy installation.
Technical Details:
- 3/4 inch shackle
- 4.75 ton rating
- Gloss Black
- Heavy duty, forged steel construction
- Corrosion resistant
Smittybilt 3/4 Inch D-Ring Shackle – Red
Smittybilt's D-Ring Shackles are the perfect vehicle recovery rigging point. These universal fit shackles will work perfectly with Smittybilt's XRC & SRC Series Bumpers as well as any other brand of off-road bumper. Smittybilt's D-Rings will provide you with years of reliable service out on the trail.
Technical Details:
- 3/4 inch shackle
- 4.75 ton rating
- Gloss Red
- Heavy duty, forged steel construction
- Corrosion resistant
Smittybilt 3/4 Inch D-Ring Shackle With Pin
Smittybilt's D-Ring Shackles are the perfect vehicle recovery rigging point. These universal fit shackles will work perfectly with Smittybilt's XRC & SRC Series Bumpers as well as any other brand of off-road bumper. Finished in black or zinc, Smittybilt's D-Rings will provide you with years of reliable service out on the trail.
Technical Details:
- Designed for high quality towing and easy installation
- 4.75 ton weight rating
- Heavy Duty Steel Forged Construction
- 3/4 inch locking pin
- Black powder coated
- Corrosion resistant
Smittybilt 7/8 Inch D-Ring Shackle
Smittybilts D-Ring Shackles are the perfect vehicle recovery rigging point. These universal fit shackles will work perfectly with Smittybilts XRC & SRC Series Bumpers as well as any other brand of off-road bumper. Finished in black or zinc, Smittybilts D-Rings will provide you with years of reliable service out on the trail.
Technical Details:
- Heavy duty cast steel construction
- D-Ring - 7/8" - 6.5 Ton Rating - Black
- Black powder coat finish
Smittybilt 7/8 Inch D-Ring Shackle With Pin
These Smittybilt quick disconnect D-ring shackles are manufactured from heavy-duty forged construction with a quick pin disconnect for fast and easy release. They are available in your choice of 3/4 or 7/8 in. diameters and feature a stainless steel cable lanyard attached to the pin. The shackles come in zinc or black powdercoated finishes, so you can choose the best look for your off-road ride. Shackle/D Ring 7/8 in. Black w/ Locking Pin
Technical Details:
- Designed for high quality towing and easy installation
- 6.5 ton weight rating
- Heavy Duty Steel Forged Construction
- 7/8 inch locking pin
- Black Powder coated
- Corrosion resistant