The MICTUNING wiring harness is up to 10 feet and with 2 Lead can hook with 1 heavy duty off road led light bar above 180w or 2 small light bar, up to 300 watt load capacity. It is universal fit for any 7" 10" 12" 20" 30" 40" 50" light bars.

Great Construction:

14 gauge wire
Quality wiring material - UL approved.
illuminated on/off toggle switch - can easily turn on/off the lights.
Inline blade fuse & 40A relay - multiple safety protection.
Universal Fit - compatible with all automobiles,Boats and devices equipped with a 10-30v power source.

Quick & Easy Install:

1. Connect the red+ wire from the fuse to battery +; connect the black wire from the relay to the battery -;
2. Connect the white+;black- wire from the relay to light bar(red/black correspond to the wire of lights bar) ;
3. Turn on on/off button of switch to test the lights bar.

CAUTION:

We recommend professional installation. Do not use for LED lights above 300W.

What you'll get:

1 Yr MICTUNING Warranty and lifetime Friendly Customer Service. Package included:1 x wiring harness with rocker switch,1 x Diagram.

Amazon's Price:

The post MICTUNING HD 14 Gauge 300W Wiring Harness W/ Relay/Rocker Switch/Fuse appeared first on TRS Garage.

MICTUNING 2-lead HD+ series harness utilizes copper 12-Gauge wires and weatherproof spade connectors for up to 600W high-power led lights connections. The whole harness is almost wrapped by a very heavy vinyl cover, with a waterproof inline fuse and reliable 60amp relay, well protecting the circuit against voltage spikes, heats and even burnouts.It compatible with all automobiles,Boats and devices equipped with a 10-30v power source.

Meanwhile, MICTUNING freely provides 3 pieces of different ampere fuses, allowing you to choose the desired fuse to ensure security of your expensive led lights/work lights. It also offers about 10ft super long wire to run from your LED on the bumper, to the battery and back to the center of the dash, very convenient for your flexible mounting.

Quick & Easy Install

1. Make a connection from the harness kit to the led light fixtures first (Red to Red, Black to Black).
2. Connect the illuminated On/Off rocker switch according to the wiring diagram.
3. Then make a connection from the harness ring-terminals to the battery (Red to positive pole and Black to negative pole).
4. Turn on or off the rocker switch to test the LED light bars.

Cautions:

- Professional installation of this HD+ series wiring harness is highly recommended!
- All the exposed wires needed to be wrapped by electrical tape to avoid a short circuit.
- Please make sure that the total power of dual light fixtures is not exceed 600W, or it would get melt.

Package Included:

1 x HD+ Wiring Harness
1 x On/Off Switch
4 x Spade Connectors
3 x Spare Fuses
1 x User Manual

Amazon's Price:

The post MICTUNING HD+ 12 Gauge 600W Wiring Harness W/ Relay/Rocker Switch/Fuse appeared first on TRS Garage.