• Two Available Leads: 12 feet extendable wiring harness, two sets of light output connectors for dual light fixtures less than 180W.
• Efficient Protection: Power relay and inline blade fuse act as the first line of defense against overcurrent and short circuit.
• Shining in the Dark: Built-in two premium LEDs emit soft light to illuminate the patterns, easy for you to find the switch in the dark.
• Wide Application: Suitable for almost all 12V battery vehicles, such as Jeeps, ATVs, UTVs, cars, motorcycles, ships, yachts and trailers.
• Package Include: 1 x Wiring Harness Kit, 1 x 5 Pin LED Rocker Switch, 1 x Instructions
• Fit Type: Universal Fit

Amazon's Price:

The post Nilight 16AWG LED LED Wiring Harness W/Relay/Fuse/Switch appeared first on TRS Garage.

• Universal fitment: the wiring harness is compatible with all automobiles, boats and devices equipped with a 12V DC power source
• 12 feet harness: 12ft heavy-duty harness, 14-gauge stranded wire, up to 380W load capacity, the length from relay to switch is extendable
• Illuminated switch: 3 pin on/off rocker switch with Red Indicator light when truing on, easy to turn on or off, long service life
• Circuit protection: power relay for safety protection. Blade fuse acts as the first Line of defense against overcurrent and short circuit
• Package include: 1 x 12 feet wiring harness, 1 x instructions

Amazon's Price:

The post Nilight 1-Lead 14AWG Heavy Duty Wiring Harness Kit appeared first on TRS Garage.

Marine-Grade Construction And IP67 Waterproof: It adopt Aluminum Plate, Scratch-proof and Corrosion Resistant, with rubber sealed cap for all sockets, water-resistant, dust-tight and debris-proof. NOT LIKE OTHERS, USE PLASTIC PLATE THAT WITH POOR HEAT DISSIPATION, NOT DURABLE.

Short Circuit / Overheat Protection: Max output power of 240W, built in Overload protection. With compact size of 7"x4.5"x2.4", suitable for most DC 12V-24V cars, UTV/ATV, trucks, trailer, RV, caravan, bus, marine boat, yacht, airplane, etc
EASY TO INSTALL: It can be installed horizontally or vertically, Pre-wired needed wiring kit for Simple Flush Mount and Breeze Installation, black to ground and red to hot wire (Hint: connect the voltmeter located wire to a separate toggle switch in case of drained battery).

What You'll Get: 1x 6-Gang rocker switch panel with voltmeter/usb charger/12v socket, 4x stainless steel screws, Plus MICTUNING Easy-contact 100% Satisfaction Service and lifetime technical support.

Amazon's Price:

The post MICTUNING Aluminum Switch Panel W/ Lighter Adapter/Dual USB/Voltmeter appeared first on TRS Garage.

• Color: Black; Material: Plastic
• Interchangeable rocker switch housing holder
• Comes with jumper wire for 5 pin ON/OFF rocker switch, plug & play
• If you have any question about how to wire your 5 pin switch by using jumper wire, please feel free to contact us, we can send you an electronic manual
• Rocker switch not included

Amazon's Price:

The post MICTUNING Rocker Switch Panel Housing Kit – Set of 4 appeared first on TRS Garage.

Quantity: 2 pcs rocker switch panel housing

Inner dimension: 1.50 x 1.06 x 0.87 inches Color: Black plastic ABS

This strong bracket gives you Unlimited options to mount many extra switches to your vehicle or boat

Amazon's Price:

The post MICTUNING 2-Piece Rocker Switch Holder Panel Housing Kit appeared first on TRS Garage.

MICTUNING provide you high quality ABS + PC fireproof V-0 rocker switch housing, can be used on various vehicles and boats, SUV, ATV, UTV, Marine

Quantity: 1 pcs rocker switch panel housing

Inner dimension: 1.50 x 1.06 x 0.87 inches Color: Black plastic ABS

This strong bracket gives you Unlimited options to mount many extra switches to your vehicle or boat

Amazon's Price:

The post MICTUNING Rocker Switch Holder Panel Housing Kit appeared first on TRS Garage.

• Double Pole Single Throw ON-OFF-ON Switch
• Black hard surface rocker
• Surface size is 2" (50mm) x 1"(25mm)
• Standard size mounting hole 1.41"(36mm) x .86"(22mm)
• This is the standard size of most switch holes in modern vehicles
• Upper light is ON when the switch is pressed UP
• Lower LED is ON when the switch is pressed Down
• Lower LED is independent and can be wired to separate dash light circuit
• All symbols are laser etched directly onto the switch face to ensure long image life

Amazon's Price:

The post MICTUNING 20 Amp LED Momentary Rocker Switch – Winch In/Out appeared first on TRS Garage.

MICTUNING 5 Pin rocker switch is a SPST (Single Pole Single Throw) on-off switch that works like a seesaw, easily turning on or off any lights. Its surface cover is designed to be streamline curved with etched patterns. Built-in LED light emits perfect beam to light up the pattern when the switch is powered up, which also allows you to clearly catch sight of it in a dark environment, no more fumbles!

It comes with little jumper connectors and single connectors all nicely made with ends on them and a rubber protector on the female ends. The whole switch fits into a standard square cut out same as all the other switches for most 4x4, Polaris RZR, Off-road, SUV, ATV, UTV, Polaris Ranger RZR, Motorsport, Boat, Marine, Jeep Wrangler, etc.

Rated at 20Amp 12V/DC and 10Amp 24V/DC, it is mainly used for controlling the LED light fixtures of car, boat and yacht, such as led light bar, headlights, tail lamps, work lights, fog lights, auxiliary lights and so on. Surface size is 2" (50mm) x 1"(25mm). Standard size mounting hole 1.41"(36mm) x .86"(22mm).

Warranty:

1 YEAR QUALITY GUARANTEE for Genuine MICTUNING 5 Pin Rocker Switch and Lifetime Friendly Customer Service.

Package included:

1x 5 Pin Rocker Switch
1x Jumper wire set
1x Diagram

Amazon's Price:

The post MICTUNING 20A 12V Blue LED Rocker Switch – Sasquatch Lights appeared first on TRS Garage.

MICTUNING 5 Pin rocker switch is a SPST (Single Pole Single Throw) on-off switch that works like a seesaw, easily turning on or off any lights. Its surface cover is designed to be streamline curved with etched patterns. Built-in LED light emits perfect beam to light up the pattern when the switch is powered up, which also allows you to clearly catch sight of it in a dark environment, no more fumbles!

It comes with little jumper connectors and single connectors all nicely made with ends on them and a rubber protector on the female ends. The whole switch fits into a standard square cut out same as all the other switches for most 4x4, Polaris RZR, Off-road, SUV, ATV, UTV, Polaris Ranger RZR, Motorsport, Boat, Marine, Jeep Wrangler, etc.

Rated at 20Amp 12V/DC and 10Amp 24V/DC, it is mainly used for controlling the LED light fixtures of car, boat and yacht, such as led light bar, headlights, tail lamps, work lights, fog lights, auxiliary lights and so on. Surface size is 2" (50mm) x 1"(25mm). Standard size mounting hole 1.41"(36mm) x .86"(22mm).

Warranty:

1 YEAR QUALITY GUARANTEE for Genuine MICTUNING 5 Pin Rocker Switch and Lifetime Friendly Customer Service.

Package included:

1x 5 Pin Rocker Switch
1x Jumper wire set
1x Diagram

Amazon's Price:

The post MICTUNING 20A 12V Blue LED Rocker Switch – Zombie Lights appeared first on TRS Garage.

MICTUNING 5 Pin rocker switch is a SPST (Single Pole Single Throw) on-off switch that works like a seesaw, easily turning on or off any lights. Its surface cover is designed to be streamline curved with etched patterns. Built-in LED light emits perfect beam to light up the pattern when the switch is powered up, which also allows you to clearly catch sight of it in a dark environment, no more fumbles!

It comes with little jumper connectors and single connectors all nicely made with ends on them and a rubber protector on the female ends. The whole switch fits into a standard square cut out same as all the other switches for most 4x4, Polaris RZR, Off-road, SUV, ATV, UTV, Polaris Ranger RZR, Motorsport, Boat, Marine, Jeep Wrangler, etc.

Rated at 20Amp 12V/DC and 10Amp 24V/DC, it is mainly used for controlling the LED light fixtures of car, boat and yacht, such as led light bar, headlights, tail lamps, work lights, fog lights, auxiliary lights and so on. Surface size is 2" (50mm) x 1"(25mm). Standard size mounting hole 1.41"(36mm) x .86"(22mm).

Warranty:

1 YEAR QUALITY GUARANTEE for Genuine MICTUNING 5 Pin Rocker Switch and Lifetime Friendly Customer Service.

Package included:

1x 5 Pin Rocker Switch
1x Jumper wire set
1x Diagram

Amazon's Price:

The post MICTUNING 20A 12V Blue LED Rocker Switch – Driving Lights appeared first on TRS Garage.