Ford Ranger Winch Bumpers Archives - TRS Garage

2019-2020 Ford Ranger Stealth Fighter Winch Bumper W/ Sensor Cutouts

Administrator — Mon, 18 May 2020 04:52:50 +0000

Give your Ford Ranger an upgrade with the Stealth Fighter steel plate winch bumper. A modern radius plate design allows the Stealth Fighter bumper to keep a tight fit to the front of the truck, while also providing your Ford Ranger with additional front-end protection.

Each Stealth Fighter bumper comes equipped with our patented universal light mount system in the center of the bumper. Mount up to 10 cube lights or a 40" radius light bar. Mix and match any brand and size light to give your Ford Ranger the optimal lighting setup that you need on your off-road adventures. Additional lighting behind the side panels can mount a single cube light per side.

Reinforced clevis mounts are designed to accept 3/4" D-Rings for extra added utility.

FEATURES

Winch mount
Sensor cutouts
Modern radius plate design
Universal light mount / Up to 10 cube lights or a 40" radius light bar
Mounts for cube lights behind side panels
100% direct bolt-on
Reinforced clevis mounts
Made in America

Amazon's Price:

The post 2019-2020 Ford Ranger Stealth Fighter Winch Bumper W/ Sensor Cutouts appeared first on TRS Garage.

2019-2020 Ford Ranger Stealth Fighter Winch Bumper

Administrator — Mon, 18 May 2020 04:30:47 +0000

Give your Ford Ranger an upgrade with the Stealth Fighter steel plate front winch bumper. A modern radius plate design allows the Stealth Fighter bumper to keep a tight fit to the front of the truck, while also providing your Ford Ranger with additional front-end protection.

Reinforced clevis mounts are designed to accept 3/4" D-Rings for extra added utility.

Features

Winch mount
Modern radius plate design
Universal light mount / Up to 10 cube lights or a 40" radius light bar
Mounts for cube lights behind side panels
100% direct bolt-on
Reinforced clevis mounts

Amazon's Price:

The post 2019-2020 Ford Ranger Stealth Fighter Winch Bumper appeared first on TRS Garage.

2019-2020 Ford Ranger Warn 104296 Ascent Baja Tube Guard

Administrator — Sun, 17 May 2020 10:21:31 +0000

Combining low-profile styling with high performance off-road features, our new bolt-on Baja tube guards are the perfect addition to your ascent bumper. These tubes add aggressive style and heavy-duty protection using sturdy 2" diameter wall tubing.

Adds aggressive style and heavy-duty protection
Sturdy 2" diameter x 120" wall tubing
Compatible with all camera vision systems and sonar parking sensors
Designed, tested, and manufactured in the USA
Compatible with 2019+ North American Spec Ford Ranger

Amazon's Price

The post 2019-2020 Ford Ranger Warn 104296 Ascent Baja Tube Guard appeared first on TRS Garage.

2019-2020 Ford Ranger Warn 104255 Trans4mer Grill Guard

Administrator — Sun, 17 May 2020 09:49:01 +0000

The WARN 104255 Bolt-On Center Grille Guard is commercial-grade and designed for the 2019-2020 Ford Ranger. It provides heavy-duty protection for the vehicle’s bumper, grille, fascia, and winch mounting system. Features a flat side member design with a stylized and replaceable rubber trim and includes 2" tubular cross members (one with welded tabs to mount lights). The innovative design reduces the install time due to no cutting, drilling, or grinding required during installation. The WARN 104255 Bolt-On Center Grille Guard requires WARN PN 103322 mount system and is designed, tested, and made in the USA. Note: this will restrict the use of adaptive cruiser control and front parking sensors.

Bolt-on center grille guard for 2019-2020 Ford Ranger; Provides protection for the vehicle’s bumper, grille, fascia, and winch mounting system
Features flat side member design with a stylized and replaceable rubber trim
Includes 2" tubular cross members, one with welded tabs to mount lights
No cutting, drilling, or grinding is required for installation allowing for reduced install time
Requires WARN PN 103322 mount system; Designed, tested, and made in the USA

Amazon's Price

The post 2019-2020 Ford Ranger Warn 104255 Trans4mer Grill Guard appeared first on TRS Garage.

2019-2020 Ford Ranger Warn 103379 Trans4mer Full Grille Guard

Administrator — Sun, 17 May 2020 09:35:58 +0000

The WARN 103379 Bolt-On Full Grille Guard is winch compatible, commercial-grade, and designed for the 2019-2020 Ford Ranger. It provides heavy-duty protection for the vehicle’s bumper, grille, fascia, and winch mounting system. Features a flat side member design with a stylized and replaceable rubber trim, includes 2" tubular cross members (one with welded tabs to mount lights), and includes durable, welded headlight guards. The innovative design reduces the install time due to no cutting, drilling, or grinding required during installation. The WARN 103379 Bolt-On Full Grille Guard requires WARN PN 103322 mount system and is designed, tested, and made in the USA. Note: this will restrict the use of adaptive cruiser control and front parking sensors.

Bolt-on full grille guard for 2019-2020 Ford Ranger; Provides protection for the vehicle’s bumper, grille, fascia, and winch mounting system
Features flat side member design with a stylized and replaceable rubber trim
Includes 2" tubular cross members, one with welded tabs to mount lights, and durable, welded headlight guards
No cutting, drilling, or grinding is required for installation allowing for reduced install time
Requires WARN PN 103322 mount system; Designed, tested, and made in the USA

Amazon's Price

The post 2019-2020 Ford Ranger Warn 103379 Trans4mer Full Grille Guard appeared first on TRS Garage.

2019-2020 Ford Ranger Warn 103322 Trans4mer Mid-Frame Mounting Kit

Administrator — Sun, 17 May 2020 09:18:51 +0000

The WARN 103322 Base Winch Mount System is commercial-grade and designed for the 2019-2020 Ford Ranger and includes the mounting bracket as well as a mid-frame winch carrier. Pull-tested and certified to withstand 12, 000 lbs. of pulling force, allowing this winch mount to be compatible with foot-down mounted winches up to 12, 000 lbs. in pulling capacity. The innovative design reduces the install time due to no cutting, drilling, or grinding required during installation. Includes provisions to mount lights and J-Hooks for recovery, and is designed, tested, and made in the USA. Fits WARN winches such as Zeon, Zeon Platinum, VR, M8, XD9, and 9. 5xp. Note: this will restrict the use of adaptive cruiser control and front parking sensors.

Base winch mount system for 2019-2020 Ford Ranger; Includes mounting bracket and mid-frame winch carrier
Pull-tested and certified to withstand 12, 000 lbs. of pulling force
Compatible with foot-down mounted winches up to 12, 000 lbs. in pulling capacity; Fits WARN winches such as Zeon, Zeon Platinum, VR, M8, XD9, and 9. 5xp
No cutting, drilling, or grinding is required for installation allowing for reduced install time
Includes provisions to mount lights and J-Hooks for recovery; Designed, tested, and made in the USA

Amazon's Price

The post 2019-2020 Ford Ranger Warn 103322 Trans4mer Mid-Frame Mounting Kit appeared first on TRS Garage.

2019-2020 Ford Ranger Warn 103465 Ascent Front Bumper

Administrator — Sun, 17 May 2020 09:07:59 +0000

The WARN 103465 Ascent Front Bumper is designed for the 2019-2020 Ford Ranger and is constructed of a durable five-stage powder coat with zirconium nanotechnology for exceptional corrosion and UV-resistance. The low-profile design that compliments OE styling and enhances clearance and is compatible with the OE parking sensors.

The bumper includes integrated light ports for 4" diameter round lights (sold separately) and is easy to install as no winch control pack relocation is required.

The Baja Tube PN 104296 is offered as a bolt-on option and is sold separately.

The WARN 103465 Ascent Front Bumper is designed, tested, and precision-manufactured in the USA and is compatible with the following WARN winches:

ZEON
ZEON Platinum VR
VR EVO
M8
XD9
9.5xp
Other mid-frame winches

Amazon's Price

The post 2019-2020 Ford Ranger Warn 103465 Ascent Front Bumper appeared first on TRS Garage.

1998-2003 Ford Ranger Warn Winch Bumper

Administrator — Wed, 13 Jun 2018 03:31:57 +0000

** I think these Warn winch bumpers are expensive, and you have to piece them together. There isn't a part number for a complete setup. But since I've been asked about them, I'm adding it to the list. Warn only lists them for the 1998-2003 Ford Ranger. Not sure why it stops at the 2003 model year. They also no longer list them for the 1987 and older Ford Rangers. **

The Grille Guard kit: the foundation of the Trans4mer mounting system, a simple, bolt-on system that installs around the factory bumpers. Comprised of two uprights and two crossbars. This is an integral required component that provides the base for all other options. The original WARN Trans4mer can be configured in several ways to match your needs. This system is engineered so the Grille Guard uprights bolt directly to the vehicle's frame, and the Winch Carrier then bolts to the Grille Guard uprights. All components are sold separately, so you can configure the system to meet your needs.

Below are the individual parts you will need to order.

Grill Guard P/N 37133:

Winch Carrier P/N 29165:

Brush Guard P/N 30146 (optional):

The post 1998-2003 Ford Ranger Warn Winch Bumper appeared first on TRS Garage.

1983-1992 Ford Ranger Winch Bumper with Bull Bar

Administrator — Sun, 22 Apr 2018 05:12:11 +0000

Master Fabricator Dan "Tubby" Billig gives you his Ford Ranger/Bronco II Front Winch Bumper with Prerunner bars. This bumper fits model years Ford Ranger (1983-1992)/ Ford Bronco II (1984-1990)

• CNC cut and formed from 1/8" Steel.
• Includes (2) 1" thick shackle tabs.
• 1/4? Winch Mount with our trademark Bottle Opener.
• Winch ready using the market standard 10" x 4.5" bottom foot mounting profile.
• Includes 1/4" mounting brackets
• Easy Bolt-on Installation.
• Hand built in the USA!

All bumpers ship unfinished/bare metal and are ready for your paint, powder coat etc.

The post 1983-1992 Ford Ranger Winch Bumper with Bull Bar appeared first on TRS Garage.

1993-1997 Ford Ranger Winch Bumper with Bull Bar

Administrator — Sat, 21 Apr 2018 22:53:43 +0000

Master Fabricator Dan "Tubby" Billig gives you his Ford Ranger Modular Front Winch Bumper.

This bumper fits model years Ford Ranger from 1993 to 1997

3-Piece Modular bumper design
End pieces 1/8" thick bolt to the main center section 3/16"
Available with optional bolt on Bull Bar Includes
(2) 1" thick shackle tabs
3/16" Winch Mount with our trademark Bottle Opener
Winch ready using the market standard 10" x 4.5" bottom foot mounting profile
3/16" mounting brackets
Easy Bolt-on Installation
Hand built in the USA!
This bumper will also fit the 1998-2011 Ranger if you ever decide to purchase one in the future
All bumpers ship unfinished/bare metal and are ready for your paint, powder coat etc.

The post 1993-1997 Ford Ranger Winch Bumper with Bull Bar appeared first on TRS Garage.