2019-2020 Ford Ranger Lift Kits

Overview

Level the front of your 2019-2023 Ford Ranger truck by installing this 2-inch leveling kit from BDS. Specially designed for the new Ranger, this 2" leveling kit is engineered for additional tire clearance and improved performance without overextending the suspension or driveline angles at full suspension droop. To prevent maxing out ball joints or CV damage, BDS gets around this issue by using a 2-piece design with a smaller top mounted steel strut spacer in combination with a preload spacer. The lift kit includes steel top mount strut spacers, pre-load spacer and custom-tuned NX2 Nitro or FOX Performance series shocks. Give your new Ranger the extra boost with this 2" leveling kit from BDS Suspension.

Features & Benefits

• Easy, 100% Bolt-on installation
• Maintains factory like ride quality
• Standard NX2 Nitro shocks with vehicle-specific valving for better control
• Upgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road

Recommended Tires & Wheels

(Trimming may be required) 285 / 70 with 17 x 8 and in. Backspace 285 / 65 with 18 x 9 and in. Backspace

Rear Shock Option

NX2 Nitro Series

• Nitrogen-charged
• Twin-tube design
• 10-stage velocity-sensitive valving
• Dual-welded ends for increased strength
• 1-3/8-inch high-flow piston
• Self-lubricating seals
• Silver powder coat finish

FOX 2.0 Performance Series

• 2-inch Impact extruded aluminum body
• Internal floating piston (IFP) monotube design
• CNC machined 6061-T6 aluminum mounting ends
• Massive 5/8-inch hard chrome plated heat-treated alloy steel shaft
• Race-developed high-flow piston design
• Application-specific valving to maximize performance
• Long-lasting clear anodized finish

 

ReadyLIFT offers 2019-2023 Ford Ranger owners a premium quality suspension choice. We combined our 3.0" front leveling kit with a 1" tall rear block for lifted stance both front and rear that provides a small amount of rake for towing or hauling. The ReadyLIFT new CNC-machined billet Aluminum 69-2930 3.0" front kit is perfect to help get the Ranger level and looking much better while a heavy-duty 1" tall rear block complete with centering pins and longer u-bolts brings the rear up nicely. This kit allows for a mild increase in tire size. 69-2930 is easy to install but does require a spring compressor. This kit uses our Top Hat Replacement technology that combines a top mount leveling kit with a spring preload spacer in one single component. Requires no cutting or modifications and installs easily in just a few hours. The ideal choice for Ranger owners who want to raise the front of their new truck and install larger wheels and tires, all while maintaining the factory ride and handling. Allows for: 18x9 +18 offset 285/60R18 18x9 +30 offset 275/65R18 20x9 +18 offset 275/55R20 20x9 +30 offset 285/55R20 NOTE: The front crash bars can be loosened and adjusted forward to increase clearance. NOTE: Not for use with Ranger Ford Performance Level 1, 2, or 3 Packages. NOTE: Not for use with Ranger Tremor Edition.  

TORCH 3" Adjustable Front Leveling Lift Kit

Enhance the look of your vehicle and run larger tires with TORCH Off Road's Lift Kit

• Our TORCH Off Road strut spacers are an easy way to get up to 3" of lift on the new 2019+ Ranger models.
• Installs right on top of your strut so you won't need longer shocks.
• Built tough to handle any terrain that you're driving on.
• Includes a 1/2" lift stackable plate so you're able to choose 3 different levels of lift.

About The Product

Kit Includes:

• 2.5" Front Lift Strut Spacers with Hardware0.5" Front Lift Strut Spacer Plate (stackable)
• Combine to make 3" Front Lift or use separately for either 2.5" or 0.5" of lift
• Comes with instructions and everything shown in the picture.

Benefits:

• Easy 1-2 hour Installation Process***
• Increase Ground Clearance And Install Larger Custom Rims & Tires

Technical Notes

• Front Lift: 2.5"-3"
• Front Strut Spacers will generate 2.5" of Lift, it is NOT a 2.5" thick spacer.
• An alignment is always recommended after altering the height of your vehicle.***

 

Overview

Take your 2019-2023 Ford Ranger truck to the next level with a 3.5-inch lift kit with FOX 2.5 Coil-Over shocks from BDS. These kits feature proprietary FOX 2.5 coil-over shocks designed specifically to bolt-on performance for increase travel and the ability to soak up the roughest terrain along with smooth on-road comfort. This kit includes everything necessary to set your Ford Ranger up right with clearance for up to 33" tires. To ensure proper drivetrain geometry the front differential is repositioned using relocation brackets. These brackets correct CV axle angle while allowing the use of the factory front skid plates. Also supplied for the front end are a pair of performance upper control arms (UCAs) designed for improved strength and suspension travel. Up front, the lift kit includes steel top mount strut spacers, pre-load spacers, differential relocation brackets and tubular upper control arms. In the rear, this kit includes heavy duty lift shackles and custom-tuned matching FOX shocks.

DSC Adjustment

FOX 2.5 coil-overs are available standard with DSC (dual speed compression) adjustment to tune the high-speed and low-speed compression damping allowing for added control on-road with the ability to easily dial in more aggressive damping offroad. Tuning is a simple twist of the two clearly defined knobs with immediate feedback to dial it in for any terrain.

HD Upper Control Arms (UCAs)

Built for strength, performance and increased travel, these upper control arms are ready to bolt-in with most leveled/lifted trucks. They use 1.5" OD x .120-wall tubular construction with an indexed ball joint cup to correct the ball joint positioning allowing additional down travel and camber adjustment. At the frame mounting ends are durometer-specific rubber bushings for maintenance-free operation while at the other end a quality greaseable ball joints for smooth, quiet operation and superior durability. Arms are finished in a durable black powder coat with a billet aluminum dust cap ready for installation right out of the box. OE Knuckle Type Ford is producing two knuckle/control arm configurations in 2019-2023 model Rangers. Cast steel knuckle equipped models have different ball joints than models equipped with Aluminum knuckles. Be sure to verify which factory knuckle your truck has before ordering by referencing our help images when customizing your kit.

Rear Shock Option

FOX 2.0 Performance Series

• 2-inch Impact extruded aluminum body
• Internal floating piston (IFP) monotube design
• CNC machined 6061-T6 aluminum mounting ends
• Large 5/8-inch hard chrome plated heat-treated alloy steel shaft
• Race-developed high-flow piston design
• Application-specific valving to maximize performance
• Long-lasting clear anodized finish

FOX 2.5 Performance Elite Series

• Increased off-road capabilities
• Easily adjust your shock for terrain, load and speed
• 2.5-inch Impact extruded aluminum body
• Massive 7/8-inch hard chrome plated heat-treated alloy steel shaft
• External reservoir design separates shock oil from the high-pressure nitrogen
• DSC - Dual Speed Compression Adjuster comes standard
• Fully serviceable for a lifetime of use
• 1-year Manufacturer's Warranty

Features & Benefits

• FOX 2.5 coil-over shocks designed specifically for increase travel and the ability to soak up the roughest terrain
• DSC adjuster adds remarkable versatility and precise tuning with a simple twist of either two adjuster knobs
• High clearance crossmembers improve strength and offroad capability
• Heavy duty steering knuckles to correct steering geometry and maintain ESC system compatibility
• Top mounted strut spacers to provide lift and install easily
• Differential skid plate for improved offroad protection
• Rear lift blocks and u-bolts to lift and level the stance

Recommended Tires & Wheels

(Trimming may be required)

• 285 / 65 with 18 x 9 and 5.75 in. Backspace
• 305 / 55 with 20 x 9 and 5 in. Backspace