1998-2011 Ford Ranger Lift Kits Archives - TRS Garage

1998-2011 Ford Ranger Rough Country CV Front Drive Shaft

Administrator — Wed, 09 Jan 2019 00:56:28 +0000

Get the most out of your Ford Ranger with Rough Country's Front CV Driveshaft! This extended drive shaft is designed to promote a better geometry on any Ford Ranger with a 5in suspension lift. This upgrade helps eliminate vibration issues and is much more durable than the factory shaft operating on a lifted vehicle.

FEATURES:

Collapsed Measurment: 36-3/8 inches
Extended Measurment: 39-1/2 inches
Reduces drive line vibrations
Includes better quality CV joints.
Shaft strength is twice as strong as the factory equipped drive shaft.

NOTES - IMPORTANT

Works on Ford Ranger with 5in of lift ONLY

Amazon's Price:

If unavailable above, CHECK HERE.

The post 1998-2011 Ford Ranger Rough Country CV Front Drive Shaft appeared first on TRS Garage.

1998-2011 Ford Ranger Rough Country 5-Inch Lift Kit

Administrator — Wed, 09 Jan 2019 00:41:35 +0000

Give your Ford Ranger a commanding, aggressive appearance and impressive off-road capabilities with Rough Country’s 5in Suspension Lift! This all-inclusive kit comes with everything you need for increased ground clearance and a lifted, leveled stance.

Rough Country’s 5in Suspension lift includes front and rear crossmembers and a set of lifted knuckles, offering plenty of ride height to clear up to a 33-inch tire! A set of included, front brake lines and a durable steel skid plate help ensure your Ranger is ready to tackle any terrain with plenty of clearance and protection. For an impressive ride quality both on and off-road, this kit also includes Rough Country’s nitrogen-charged N3 shocks. These 10-stage variable valving shocks feature a durable 18mm spring loaded piston rod, huge 54mm shock body, and reinforced seals for a long lifespan of smooth performance.

This kit requires only minor cutting to install, and features a set of upper control arm cam bolts making it easy to achieve a proper alignment after lifting. Best of all, this kit includes Rough Country’s Lifetime Replacement Guarantee!

FEATURES

Lifts and levels front with rear
Increased ground clearance
Includes upper control arm cam bolts for easier alignment

NOTES - IMPORTANT

17in or larger wheels are REQUIRED
Does NOT fit 11.25" rotors found on some 98-03 models
Models with 11.25" rotors must upgrade to 12.1" rotors
98-99 models equipped with pulse vacuum hub (PVH) port routed through the knuckle will need to be converted to manual hubs.
An upgraded drive shaft is HIGHLY recommended, such as #5089.1
A torsion bar tool is required for installation, such as #1067
Specialty tools may be required for models equipped with vacuum operated hubs.
SKU 43130
Est. Install Time 6-8 hours
Recommended Tire Size 285/70R17
Recommended Wheel Backspacing 4.5"

In The Box:

FRONT

Front Crossmember
Lifted Knuckles
Skid Plate
Differential Brackets
Torsion Drop Brackets
Sway Links
Extended Brake Lines

REAR

Rear Crossmember
Differential Brackets
Bump Stops
Brake Line Brackets
Anti-Wrap Rear Blocks
U-Bolts

SHOCKS

(4) Premium N3 Shocks

Amazon's Price:

The post 1998-2011 Ford Ranger Rough Country 5-Inch Lift Kit appeared first on TRS Garage.

1998-2010 Ford Ranger 4WD Superlift Front Driveshaft

Administrator — Mon, 18 Jun 2018 23:40:05 +0000

Due to the front driveshaft's increased operating angle from Superlift's 4-inch suspension lift, the 1998-2010 Ford Ranger factory driveshaft service life is decreased substantially; expect no more than 20,000 miles.

Superlift's replacement heavy duty CV style (dual Cardan) driveshaft is designed for higher operating angles.

Amazon's Price:

The post 1998-2010 Ford Ranger 4WD Superlift Front Driveshaft appeared first on TRS Garage.

2000-2010 Ford Ranger 4×4 Superlift 4-Inch Suspension Lift Kit

Administrator — Mon, 18 Jun 2018 23:07:48 +0000

Superlift's complete knuckle style suspension lift kit for the 2000-2010 Ford Ranger 4wd, providing 4-inches of lift height.

New nodular iron knuckles, not ball joint spacers
Load bearing bracketry made of .25" thick plate steel or heavy-wall tubing
Full width differential / control arm crossmembers provide lateral rigidity
Rear lift options: lift blocks
Front / rear Superide shocks included
Heavy-duty replacement front driveshaft available
Limited Lifetime Warranty
Satisfaction Guarantee

Allows for 33x12.5 inch tires.

The lift kit retains factory ride quality, steering geometry and CV axle angles. All load-bearing bracketry is laser-cut from .25" steel plate.

This replacement steering knuckle lift includes lower control arm crossmembers, plus bracketry to lower the torsion bar crossmember.

A 3-inch block kit provides rear lift. The lift kit includes front and rear Superide shocks.

Expect the factory front drivesahaft to last no more than 20K miles; Superlift offers an optional heavy duty CV style replacement shaft.

Note that FX4 models require optional Rear U-bolt Kit P/N 10914.

Note: NOT recommended for 2010 models that have Traction Control/Stability Control

Amazon's Price:

The post 2000-2010 Ford Ranger 4×4 Superlift 4-Inch Suspension Lift Kit appeared first on TRS Garage.

1998-1999 Ford Ranger 4×4 Superlift 4-Inch Suspension Lift Kit

Administrator — Mon, 18 Jun 2018 22:51:19 +0000

This is Superlift's complete knuckle style suspension lift kit for the 1998-1999 Ford Ranger 4wd; providing 4-inches of lift height.

New nodular iron knuckles, not ball joint spacers
Load bearing bracketry made of .25" thick plate steel or heavy-wall tubing
Full width differential / control arm crossmembers provide lateral rigidity
Rear lift achieved via blocks
Front / rear Superide shocks included
Heavy-duty replacement front driveshaft available
Limited Lifetime Warranty
Satisfaction Guarantee

Allows for 33x12.5 tires.

The lift kit retains factory ride quality, steering geometry and CV axle angles. All load-bearing bracketry is laser-cut from .25" steel plate.

This replacement steering knuckle lift includes lower control arm crossmembers, plus bracketry to lower the torsion bar crossmember.

A 3-inch block kit provides rear lift. The lift kit includes front and rear Superide shocks.

Note that FX4 models require optional Rear U-bolt Kit P/N 10914.

Amazon's Price:

The post 1998-1999 Ford Ranger 4×4 Superlift 4-Inch Suspension Lift Kit appeared first on TRS Garage.

ReadyLift 66-7816A Universal Torsion Key Unloading Tool

Administrator — Mon, 19 Mar 2018 20:58:22 +0000

Every truck with a torsion bar front suspension requires a unique torsion key unloading tool and nothing beats ReadyLIFT's Professional Grade Torsion Key Removal Tool. Made from forged hardened steel, this tool makes removing and installing torsion keys safe and easy, allowing for adjustment or replacement of Ford, Dodge, GM and Hummer torsion keys in as little as 15 minutes per truck. The forged and hardened steel used in the construction of this tool is the strongest and safest on the market, Can be used with other makes and models of trucks with torsion keys. Our new Universal Torsion Key Tool has been rigorously tested and will work safely and easily.

“NOTE: Tools not intended for commercial use. Use only for occasional projects.”

The post ReadyLift 66-7816A Universal Torsion Key Unloading Tool appeared first on TRS Garage.

Torsion Bar Adjustment Tool for Ford – OTC 7816

Administrator — Mon, 19 Mar 2018 20:50:38 +0000

OTC Torsion Bar Adjustment Tool for Ford Before servicing a torsion bar on 1998-2011 Ford Ranger vehicles you must first contain the bar to avoid possible damage. This tool securely accomplishes that task allowing you to make adjustments. It is similar to Ford No. 204-185 (T95T-5310-AR).

The post Torsion Bar Adjustment Tool for Ford – OTC 7816 appeared first on TRS Garage.

ReadyLift 2.25-Inch Leveling Lift Kit – 66-2020

Administrator — Mon, 19 Mar 2018 20:27:59 +0000

ReadyLIFT leveling kits are the fastest, safest, least expensive way to bring the front of your vehicle level with the rear. Our forged torsion keys are designed to grab the FLAT of the torsion bar for a tighter, sturdier fit. CNC machined adjuster bolt pockets ensuring an accurate and safe adjustment. Only ReadyLIFT torsion keys are forged, making them 25% stronger than OEM and designed to last the life of your vehicle.

Tire Fitment:

32" Maximum tire diameter
32x10.50 for no rub on a 8" wide wheel with 0 offset
17" - 275/70R17
18" - 255/70R18
20" - 265/60R20

The post ReadyLift 2.25-Inch Leveling Lift Kit – 66-2020 appeared first on TRS Garage.

Pro Comp 2.25-Inch Leveling Lift Kit – 62170

Administrator — Mon, 19 Mar 2018 20:17:23 +0000

Pro Comp is the fastest, safest, least expensive way to bring the front of your Vehicle level with the rear. This gives you the clearance and ability to add wheels and tires up to 33" in dia. Pro Comp products do not affect the factory OEM ride quality or comfort. Thats why Pro Comp also offers a lifetime warranty for as long as you own your vehicle against defects for all of our products.

Technical Details:

Lift Height: 2.25 Inch
Two Torsion Keys
Hardware Kit
Max Tire Size: 33 Inch

Amazon's Price:

The post Pro Comp 2.25-Inch Leveling Lift Kit – 62170 appeared first on TRS Garage.

Tuff Country 1.5-Inch Leveling Lift Kit – 22907

Administrator — Mon, 19 Mar 2018 20:07:11 +0000

Tuff Country's Leveling Kits level the front of your truck or SUV with the rear, allowing for slightly larger tires and eliminating the nose-down, factory rake. Tuff Country EZ-Ride Suspension was one of the original manufacturers of suspension leveling kits for trucks and SUV's and all Tuff Country Leveling kits are made of the highest quality materials. Engineered to maintain a factory or near-factory ride quality on all vehicles.

Technical Details:

Torsion Key Leveling Kit
1.5 inch Lift Torsion Bar Keys
Max Tire Size: 33 inches

Amazon's Price:

The post Tuff Country 1.5-Inch Leveling Lift Kit – 22907 appeared first on TRS Garage.