Axles - Lockers - Rear Archives - TRS Garage https://trsgarage.com/product-category/axles-lockers/axles-lockers-rear/ Your Ford Ranger Outfitter Since 2005 Wed, 20 May 2020 02:08:23 +0000 en-US hourly 1 https://wordpress.org/?v=6.2.5 Ford 7.5-Inch Yukon Dura Grip Locker https://trsgarage.com/product/ford-7-5-inch-yukon-dura-grip-locker/ Wed, 20 May 2020 02:08:23 +0000 https://trsaorp.com/?post_type=product&p=2226 Yukon’s Dura Grip is a positraction limited slip differential that provides smooth yet aggressive traction, giving you the confidence and performance you need across a wide variety of terrains. The Dura Grip posi limited-slip is engineered for long life and is completely rebuildable. Dura Grips are built with a high strength nodular case, forged 4320 chromoly spider gears, and Raybestos composite clutches. For unmatched positraction performance, the Dura Grip is the ultimate choice. When your vehicle demands performance, durability and strength, choose Yukon’s Dura Grip. Whether it’s at the track, off roading, racing or on the street, you deserve the confidence that these units offer.

Amazon's Price:


The post Ford 7.5-Inch Yukon Dura Grip Locker appeared first on TRS Garage.

]]> The post Ford 7.5-Inch Yukon Dura Grip Locker appeared first on TRS Garage.

]]> Powertrax PT1830 Lock-Right Locker For Ford 7.5 28-Spline Axles https://trsgarage.com/product/powertrax-pt1830-lock-right-locker-for-ford-7-5-28-spline-axles/ Sat, 03 Mar 2018 06:24:21 +0000 http://jamesoaksenterprises.com/?post_type=product&p=273 Powertrax® Lock-Right performance lockers’ straight-line performance is equal to a solid spool axle, yet they automatically unlock during turns. When extreme traction output and high-strength are required, racers, hot-rodders and muscle car owners chose Lock-Right lockers!

Best suited for extreme off-road to severe on-road use, Powertrax lockers replace the spider gears in your differential carrier without affecting your ring and pinion settings. The whole job can be done in your driveway with common hand tools in a couple of hours. A carrier is not included.

  • Brute Force Devices For Rugged Applications
  • Replacement Of Differential Case Not Required
  • Ring And Pinion Setup Not Altered
  • Installs Easily In Front/Rear Or Both
  • Proven In Most Demanding Applications

Fits:

  • 1983-2011 Ford Ranger
  • 1984-1989 Ford Bronco II

 

Amazon's Price:

The post Powertrax PT1830 Lock-Right Locker For Ford 7.5 28-Spline Axles appeared first on TRS Garage.

]]> The post Powertrax PT1830 Lock-Right Locker For Ford 7.5 28-Spline Axles appeared first on TRS Garage.

]]> Eaton E-Locker For Ford 8.8-Inch 28-Spline Axles https://trsgarage.com/product/eaton-e-locker-for-ford-8-8-inch-28-spline-axles/ Sat, 03 Mar 2018 06:09:02 +0000 http://jamesoaksenterprises.com/?post_type=product&p=271 Eaton electronic ELocker differentials offer you the best of both worlds. Imagine having the comfort and convenience of an open differential for around town, and the powerful traction of a full-on locker when it’s necessary. This is exactly what the Eaton ELockers provide. With the push of a dash-mounted button, you decide when the differential should be fully locked for maximum traction to both wheels, or free to differentiate for the best fuel mileage and tire tread life. Whether you’re running a 2WD or 4WD, open or locked, the Eaton ELockers put the driver in total control! Order the carrier designed for your axle model.

Fits:

1990-2011 Ford Ranger with a 28-spline 8.8-inch axle.

Will not fit the Ford Ranger FX4 if equipped with 31-spline 8.8-inch axles.

 

Amazon’s Price:

The post Eaton E-Locker For Ford 8.8-Inch 28-Spline Axles appeared first on TRS Garage.

]]> The post Eaton E-Locker For Ford 8.8-Inch 28-Spline Axles appeared first on TRS Garage.

]]> Auburn Gear ECTED Max-Locker For Ford 8.8-Inch 28-Spline Axle https://trsgarage.com/product/auburn-gear-ected-max-locker-for-ford-8-8-inch-28-spline-axle/ Sat, 03 Mar 2018 05:50:43 +0000 http://jamesoaksenterprises.com/?post_type=product&p=267 Auburn Gear ECTED Max-Locker differentials maximize your vehicle’s traction with on-the-go system engage. These electronically controlled traction-enhancing differentials are selectable lockers offering the traction control of a limited-slip differential and a full-locking differential–all in one! Hand-inspected and assembled, Auburn Gear ECTED Max-Lockers feature a unique cone-clutch design with gearing made from aircraft-quality 9310 heat-treated billet steel for tough-as-nails strength. The lockers operate quietly without any shift fork or pins to line up to change the locker mode. With a limited-slip mode for on/off-road excitement and a true locker mode for the quarter-mile and nasty off-road terrain, Auburn Gear ECTED Max-Locker differentials deliver superior traction capabilities on the street, at the track, or off-road.

Technical Details:

  • For Use With 28 Spline Axles
  • For Use With All Ratios
  • Able To Shift From Limited Slip To Spool On The Fly
  • No Additional Parts Needed
  • Smooth Street Operation
  • 4 Year Replacement Warranty

Fits:

1990-2011 Ford Ranger with a 28-spline 8.8-inch axle.

Will not fit the Ford Ranger FX4 if equipped with 31-spline 8.8-inch axles.

 

Amazon’s Price:

The post Auburn Gear ECTED Max-Locker For Ford 8.8-Inch 28-Spline Axle appeared first on TRS Garage.

]]> The post Auburn Gear ECTED Max-Locker For Ford 8.8-Inch 28-Spline Axle appeared first on TRS Garage.

]]> Detroit Locker DET187C147A For 1987-Up Ford 8.8-Inch 28-Spline Axles https://trsgarage.com/product/detroit-locker-det187c147a-for-1987-up-ford-8-8-inch-28-spline-axles/ Sat, 03 Mar 2018 05:34:06 +0000 http://jamesoaksenterprises.com/?post_type=product&p=263 The Detroit Locker maximizes traction by delivering 100% of the torque to both drive wheels. It is engineered to keep both wheels in a constant drive mode, and has the ability to automatically allow wheel speed differentiation when required. No other performance differential has the reputation for delivering traction in mud, snow, rocks and on the track.

Technical Details:

  • For Use With 28 Spline Axles
  • For Use With All Gears
  • Automatic Locking
  • Legendary Traction
  • Unmatched Durability

Fits:

1990-2011 Ford Ranger with a 28-spline 8.8-inch axle.

Will not fit the Ford Ranger FX4 if equipped with 31-spline 8.8-inch axles.

 

Amazon's Price:

The post Detroit Locker DET187C147A For 1987-Up Ford 8.8-Inch 28-Spline Axles appeared first on TRS Garage.

]]> The post Detroit Locker DET187C147A For 1987-Up Ford 8.8-Inch 28-Spline Axles appeared first on TRS Garage.

]]> Powertrax PT1820 Lock-Right Locker For Ford 8.8 28-Spline Axles https://trsgarage.com/product/powertrax-pt1820-lock-right-locker-for-ford-8-8-31-spline-axles/ Sat, 03 Mar 2018 05:14:26 +0000 http://jamesoaksenterprises.com/?post_type=product&p=259 Powertrax® Lock-Right performance lockers’ straight-line performance is equal to a solid spool axle, yet they automatically unlock during turns. When extreme traction output and high-strength are required, racers, hot-rodders and muscle car owners chose Lock-Right lockers!

Best suited for extreme off-road to severe on-road use, Powertrax lockers replace the spider gears in your differential carrier without affecting your ring and pinion settings. The whole job can be done in your driveway with common hand tools in a couple of hours. A carrier is not included.

  • Brute Force Devices For Rugged Applications
  • Replacement Of Differential Case Not Required
  • Ring And Pinion Setup Not Altered
  • Installs Easily In Front/Rear Or Both
  • Proven In Most Demanding Applications

Application notes:

  • For Ford 8.8" (10 Bolt)
  • 28 Spline
  • For Open Differential
  • 3/4" Shaft

Fits:

1990-2011 Ford Ranger with a 28-spline 8.8-inch axle.

Will not fit the Ford Ranger FX4 if equipped with 31-spline 8.8-inch axles.

 

Amazon's Price:

The post Powertrax PT1820 Lock-Right Locker For Ford 8.8 28-Spline Axles appeared first on TRS Garage.

]]> The post Powertrax PT1820 Lock-Right Locker For Ford 8.8 28-Spline Axles appeared first on TRS Garage.

]]> ARB Air Locker Ford Ford 8.8-Inch 31-Spline Axle https://trsgarage.com/product/arb-air-locker-ford-ford-8-8-inch-31-spline-axle/ Sat, 03 Mar 2018 04:55:21 +0000 http://jamesoaksenterprises.com/?post_type=product&p=256 The ARB Air Locker is a pneumatic locking differential that uses air to facilitate the locking of both axles. This action converts your differential from a conventional open to a full spool type axle supplying 100% power to both wheels to keep you going through the worst terrain. ARB onboard air compressor required to activate Air Lockers. Sold Separately.

Fits:

1991-2001 Ford Explorer with Ford 8.8-Inch 31-spline axle (not IRS independent rear suspension)
2001-2010 Ford Explorer with Ford 8.8-Inch 31-spline axle
2002 Ford Ranger FX4 with Ford 8.8-Inch 31-spline axle
2003-2007 Ford Ranger FX4 Levell II with Ford 8.8-Inch 31-spline axle
2008-2009 Ford Ranger FX4 IF equipped with Ford 8.8-Inch 31-spline axle

 

Amazon’s Price:

The post ARB Air Locker Ford Ford 8.8-Inch 31-Spline Axle appeared first on TRS Garage.

]]> The post ARB Air Locker Ford Ford 8.8-Inch 31-Spline Axle appeared first on TRS Garage.

]]> Auburn Gear ECTED Max-Locker For Ford 8.8-Inch 31-Spline Axle https://trsgarage.com/product/auburn-gear-ected-max-locker-for-ford-8-8-inch-31-spline-axle/ Wed, 28 Feb 2018 09:13:51 +0000 http://jamesoaksenterprises.com/?post_type=product&p=224 Auburn Gear ECTED Max-Locker differentials maximize your vehicle's traction with on-the-go system engage. These electronically controlled traction-enhancing differentials are selectable lockers offering the traction control of a limited-slip differential and a full-locking differential--all in one! Hand-inspected and assembled, Auburn Gear ECTED Max-Lockers feature a unique cone-clutch design with gearing made from aircraft-quality 9310 heat-treated billet steel for tough-as-nails strength. The lockers operate quietly without any shift fork or pins to line up to change the locker mode. With a limited-slip mode for on/off-road excitement and a true locker mode for the quarter-mile and nasty off-road terrain, Auburn Gear ECTED Max-Locker differentials deliver superior traction capabilities on the street, at the track, or off-road.

Note: Not for IRS independent rear suspension

Fits:

1991-2001 Ford Explorer with Ford 8.8-Inch 31-spline axle (not IRS independent rear suspension)
2001-2010 Ford Explorer with Ford 8.8-Inch 31-spline axle
2002 Ford Ranger FX4 with Ford 8.8-Inch 31-spline axle
2003-2007 Ford Ranger FX4 Levell II with Ford 8.8-Inch 31-spline axle
2008-2009 Ford Ranger FX4 IF equipped with Ford 8.8-Inch 31-spline axle

 

Amazon's Price:


The post Auburn Gear ECTED Max-Locker For Ford 8.8-Inch 31-Spline Axle appeared first on TRS Garage.

]]> The post Auburn Gear ECTED Max-Locker For Ford 8.8-Inch 31-Spline Axle appeared first on TRS Garage.

]]> Detroit Locker DET187C-145A For 1987-Up Ford 8.8-Inch 31-Spline Axles https://trsgarage.com/product/detroit-locker-det187c-145a-for-1987-up-ford-8-8-inch-31-spline-axles/ Wed, 28 Feb 2018 08:38:44 +0000 http://jamesoaksenterprises.com/?post_type=product&p=220 The Detroit locker provides maximum traction for off-road or racing use. The heavy-duty case and internals provide a dramatic increase in strength while giving 100% torque to both tires. The mechanically-operated unit works by locking while under power and unlocking when you let off the gas, allowing you to turn. Unit comes standard with a one year warranty against workmanship defects. In applications with 4.88 or higher ratios, the ring gear will need to be ground to clear the c/clip block.

Technical Notes: If installing this unit with 4.88 & up gear ratios, you will need to grind ring gear teeth to clear the cross pin.

For Use In 1987 Up Axles With 7/8-inch Cross Pin

Fits:

  • 1991 - 2001 Ford Explorer with Ford 8.8-Inch 31-spline axle (not IRS independent rear suspension)
  • 2001 - 2010 Ford Explorer with Ford 8.8-Inch 31-spline axle
  • 2002 Ford Ranger FX4 with Ford 8.8-Inch 31-spline axle
  • 2003-2007 Ford Ranger FX4 Levell II with Ford 8.8-Inch 31-spline axle
  • 2008-2009 Ford Ranger FX4 IF equipped with Ford 8.8-Inch 31-spline axle

 

Amazon's Price:

The post Detroit Locker DET187C-145A For 1987-Up Ford 8.8-Inch 31-Spline Axles appeared first on TRS Garage.

]]> The post Detroit Locker DET187C-145A For 1987-Up Ford 8.8-Inch 31-Spline Axles appeared first on TRS Garage.

]]> Powertrax PT1822 Lock-Right Locker For Ford 8.8 31-Spline Axles https://trsgarage.com/product/powertrax-pt1822-lock-right-locker-for-ford-8-8-31-spline-axles/ Wed, 28 Feb 2018 08:00:29 +0000 http://jamesoaksenterprises.com/?post_type=product&p=216 Powertrax® Lock-Right performance lockers’ straight-line performance is equal to a solid spool axle, yet they automatically unlock during turns. When extreme traction output and high-strength are required, racers, hot-rodders and muscle car owners chose Lock-Right lockers!

Best suited for extreme off-road to severe on-road use, Powertrax lockers replace the spider gears in your differential carrier without affecting your ring and pinion settings. The whole job can be done in your driveway with common hand tools in a couple of hours. A carrier is not included.

  • Brute Force Devices For Rugged Applications
  • Replacement Of Differential Case Not Required
  • Ring And Pinion Setup Not Altered
  • Installs Easily In Front/Rear Or Both
  • Proven In Most Demanding Applications

Application notes:

  • For Ford 8.8" (10 Bolt)
  • 31 Spline
  • For Open Differential
  • 7/8" Shaft

Fits:

1990 - 2015 Ford Explorer 8.8-Inch 31-spline axles

2002 Ford Ranger FX4 with 8.8-Inch 31-spline axles

2003-2007 Ford Ranger FX4 Level II with 8.8-Inch 31-spline axles

2008-2009 Ford Ranger FX4 IF equipped with a 8.8-Inch 31-spline axle

 

Amazon's Price:

The post Powertrax PT1822 Lock-Right Locker For Ford 8.8 31-Spline Axles appeared first on TRS Garage.

]]> The post Powertrax PT1822 Lock-Right Locker For Ford 8.8 31-Spline Axles appeared first on TRS Garage.

]]>