Back to 1983-1997 Ford Ranger Lift Kits
Daystar Leveling Kit For 1983-1997 Ford Ranger
Fits the following vehicles:
- 1999-2012 F250/F350 Super Duty RWD
- 1983-1997 Ford Bronco II RWD
- 1983-1996 Ford Ranger RWD
Higher, More Level Stance
Daystar gives you and your Ford truck one of the easiest and most cost-effective ways to gain the extra clearance you need to mount extra-large off-road wheel and tire packages and hit those trails with this awesome 2″ leveling kit. This leveling system raises the front ride height of your Super Duty, Bronco, or Ranger by 2″ which allows you to fit on up to 33″ tires on a Ranger or Bronco, and up to 32″ tires on a Super Duty. The leveling kit also gives your truck an even and stance by eliminating your truck’s rake.
For Street and Off-Road Applications
Daystar’s leveling kit is made up of a pair of polyurethane coil spring spacers that give your truck its necessary lift without any metal-on-metal contact in a successful effort to keep NVH down to the bare minimum. Just because they’re quiet, doesn’t mean they’re weak, and Daystar’s unique high-density progressive polyurethane blend can handle just about anything or anywhere you and your truck can go. Daystar’s kit features a straightforward installation and comes with hardware and instructions.
Related products
BDS 4-Inch Suspension Kit For 1983-1997 Ford Ranger
Overview
Improve the ride and level out your 1983-1997 Ford Ranger 4WD truck with a 4-inch suspension lift kit by BDS. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 31" tires. Up front the lift kit includes Pro-Ride coil springs, heavy duty axle pivot brackets, radius arm drop brackets, forged pitman arm for steering correction, bump stop extensions and precision tuned NX2 nitrogen charged shocks. In the rear the base kit utilizes a high strength lift block, longer U-bolts and a matching set of NX2 Nitro shocks.Pro-Ride Coil Springs
A pair of full-length, truck-specific, Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.Features & Benefits
- Easy, Bolt-on installation
- Pro-Ride dual rate coil springs ride smooth through any terrain
- Heavy duty steel drop brackets for proper suspension geometry
- Cast steel blocks provide level stance from front to rear
- NX2 Nitro shocks with vehicle-specific valving for better control
Recommended Tires & Wheels
(Trimming may be required) 31 x 10.5 with 15 x 8 and 3.5 in. Backspace 
Skyjacker 4-Inch Suspension Kit P/N 134RHK
You will become the envy of the neighborhood when you transform your Ranger into an impressive off-road capable rig. Whether you need a little lift or a lot, Skyjacker has a lift system that will work for you. Skyjackers precision engineered front axle pivot brackets and matching coil springs are uniquely designed performance essentials. Class II Kit lower radius arms offer at least 30 percent more suspension flex and travel.
Technical Details:
- Fits 1983-1997 Ford Ranger 4x4
- 4-inch Suspension Lift Kit
- Includes Front Coil Springs
- Rear U Bolt Kit
- Rear Block
- Requires dropped pitman arm for 4-inch lift - click HERE
- Shocks not included.
Rough Country 4-In Lift W Rear Springs 1983-1997 Ford Ranger
Features
Give your 83-97 Ford Ranger an aggressive look from front to rear with Rough Country’s 4-inch Ford Suspension System! This easy-to-install leveling kit raises the front of your vehicle to be equal height with the rear for a leveled, flush look that gives a better ride height and more aggressive appearance. This kit features a set of front, durable coil springs and rear leaf springs allowing you gain additional ride height without sacrificing ride quality or performance. A set of radius arm and I-Beam drop brackets are provided to keep everything at optimum angles for a factory-like ride, even after lifting. Our fabricated rear blocks offer considerably more strength than their cast iron counterparts. A set of Rough Country's premium N3 shocks are also included in this kit. These fine-tuned 10-stage variable high-pressure Nitrogen charged shocks offer a fantastic blend of off-road action and smooth highway ride quality. With a durable 18mm spring-loaded piston rod and faster-cooling 54mm shock body. Get the wheels you want! Rough Country's 4" Ford Suspension Lift System comes with everything you need to fit up to a 31x10.5" tire with proper wheel backspacing. Best of all, Rough Country's 4" Ford Suspension Lift System is backed by our Lifetime Replacement Warranty.- Increased ground clearance
- Levels the front with the rear of the vehicle
- Radius arm drop brackets allow for properly set caster. Proper caster is crucial to maintaining factory handling and driveability.
Fitment Notes
- Does NOT fit models with manual steering.
- Does NOT fit 87-88 models with "High Rider STX" package.
- If vehicle is equipped with a front sway-bar, drop brackets are recommended. (#1018)
Rough Country 43030 4-inch Lift Kit for 1983-1997 Ford Ranger
Features
Give your 83-97 Ford Ranger an aggressive look from front to rear with Rough Country’s 4" Ford Suspension Lift Kit! This easy-to-install leveling kit raises the front of your vehicle to be equal height with the rear for a leveled, flush look that gives a better ride height and more aggressive appearance. This kit features a set of front, durable coil springs allowing you gain additional ride height without sacrificing ride quality or performance. A set of radius arm and I-Beam drop brackets are provided to keep everything at optimum angles for a factory-like ride, even after lifting. Our fabricated rear blocks offer considerably more strength than their cast iron counterparts. A set of Rough Country's premium N3 shocks are also included in this kit. These fine-tuned 10-stage variable high-pressure Nitrogen charged shocks offer a fantastic blend of off-road action and smooth highway ride quality. With a durable 18mm spring-loaded piston rod and faster-cooling 54mm shock body. Get the wheels you want! Rough Country's 4" Ford Suspension Lift Kit comes with everything you need to fit up to a 31x10.5" tire with proper wheel backspacing. Best of all, Rough Country's 4" Ford Suspension Lift Kit is backed by our Lifetime Replacement Warranty.- Increased ground clearance
- Levels the front with the rear of the vehicle
- Radius arm drop brackets allow for properly set caster. Proper caster is crucial to maintaining factory handling and driveability.
Fitment Notes
- Does NOT fit models with manual steering.
- Does NOT fit 87-88 models with "High Rider STX" package.
- If vehicle is equipped with a front sway-bar, drop brackets are recommended. (#1018)