Back to Fuse & Relay Holders
8 AWG Waterproof Inline Fuse Holder
Automotive and Marine applications (motorcycle, RTV, ATV, truck, car, trailer, snowmobile). Fuse holder with 5 AMP Fuse. Marine grade MAXI fuse holders which are waterproof with a tight fitting soft vinyl cap. Each has a 6 inch wire loop which is 8 AWG.
- Waterpoof Sealed Cap
- Automotive Style Fuses
- Comes with 40A MAXI Fuse
- 8 Gauge Red Wire
- High Quality
Amazon’s Price:
Related products
10-Way 12V Blade Fuse Box W/LED Indicator & Cover
This 10 way ATC/ATO blade fuse holder box is compact, yet rugged in construction. LED illuminated, the red LED indicator light allows you to quickly diagnose which of the fuse has “popped”. This fuse panel has a #10-32 stud for power feed, .250” male quick disconnect terminals, can take an input voltage of 10 – 32 V DC, can handle a maximum of 30 Amp per circuit with a maximum of 100 Amp per panel, and has a cover for additional protection.
Interchangeable/Compatible with:
All automobiles and devices equipped with a 10-32 Volt DC power source.
Features:
- High quality construction.
- Red LED illuminates when fuse is blown.
- Maximum of 30 Amp per circuit and 100 Amp per panel.
- Clear cover included for additional protection.
- 1 x Fuse Box with Cover
Amazon's Price:
12V Waterproof Universal Fuse Relay Box
IP65 Waterproof 6-Slot ATC/ATO Fuse + 6-Slot 5-Pin Relay Box
Trying to organize harnesses, fuses, and relays can quickly have you driving in circles. Get your bearings with a dedicated, waterproof relay box. Like a trail map for your wiring, our relay box is the most efficient way to consolidate, organize, and keep track of all your aftermarket accessories. Boasting a six relay/fuse capacity, this relay box is more than capable of powering and protecting up to six independent circuits.
- Durable Nylon 66 Construction
- IP65 Waterproof
- 6 Relay and Fuse Sockets
- Comes with ALL Needed Seals and Terminals
What's Included?
- (1) Waterproof Fuse Relay Box
- (1) Pack of Relay Rubber Pads
- (1) Pack of Fuse Rubber Pads
- (1) Pack of Relay Wire Terminals
- (1) Pack of Fuse Wire Terminals
- (1) Pack of Brackets and Fasteners
- (1) Rubber Gasket
- (1) Waterproof Ring
- (1) Instruction Manual
Details & Specs
- Front Dimension: L1: 8-13/16", L2: 6-7/16", H1: 3-3/4", H2: 3-3/16",M1: 5-7/8", M2: 8-5/16"
- Side Dimension: W1: 6", W2: 3-15/16", M3: 3-3/32", M4: 5-1/2"
- Package & Dimension: Length (In): 6.25, Width (In): 2.63, Height (In): 2.88
Amazon's Price:
MUYI 2 Sets Inline Fuse Holder 10 Gauge Waterproof
- 10 AWG thick red pigtail wire allow you to splice it into any project.
- Wire length: 6 inches 10 gauge wire each side, Fuse holder dimension: 41x35x15mm
- Waterproof design, the rubber cap fits on tightly to protect any standard blade fuse inside. NOT easy to fall off or let water in.
- Inline Fuse Holder for standard blade fuses, Suitable for 1A,2A,3A,5A,7.5A,10A,15A,20A,30A,40A, ideal for car truck trailer atv boat marine
- Package Included: 2 X Standard Blade Fuse Holder and 2 X 40Amp Standard Blade Fuse
Amazon's Price:
10 AWG In-Line Blade ATC/ATO Waterproof Fuse Holder
- Heavy duty 10 gauge(AWG) In-line fuse holder Cable for ATC/ATO type fuses (Blade Large Size Fuse Holder).
- Waterproof design, rubber cap fits tightly to protect the fuse inside any standard blade. It's not easy to fall off or drain, so you can easily modify your car's electronics in a safe way. Don't worry about bursting or overloading that can damage your car's power train.
- Built-in fuse holder for standard blade fuses, suitable for 1A, 2A, 3A, 5A, 7.5A, 10A, 15A, 20A, 30A, 40A,50A,60A, ideal for car boat truck auto use,added protection to the circuit.
- Material:copper+rubber,fuse holder size: 3.1 x 2.4 x 0.6 inch.
- Package Included: 1 X 10AWG Blade Fuse Holder .Fuse not included.